Hyundai i40 2.0 MPI 153 hp — Stage 1 file (+4 hp)
hp
Stage 1 file for Hyundai i40 2.0 MPI 153 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai i40 2.0 MPI 153 hp ECU
Hyundai i40 (2011) 2.0 MPI 153 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 153 to 157 hp (+4 hp, +3%) and torque from 186 to 191 Nm (+5 Nm). This engine ships with different ECU variants: Siemens/Continental SIM2K-240, Siemens/Continental SIM2K-241, Siemens/Continental SIM2K-242, Siemens/Continental SIM2K-341. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2011 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Hyundai shares platforms and engines with Kia and Genesis. The Hyundai N-series are sporting turbo engines for the i30 N, Elantra N and Kona N. Hyundai turbo petrol engines deliver a noticeable gain with Stage 1. Smartstream is Hyundai's modern engine range with an emphasis on economy.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on the Hyundai T-GDI delivers a noticeable gain. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
How much does the power of the Hyundai i40 2.0 MPI 153 hp increase after Stage 1?
After Stage 1 the power of the Hyundai i40 2.0 MPI 153 hp rises from 153 to 157 hp, a gain of 4 hp (+3%). Torque rises from 186 to 191 Nm (+5 Nm).
How does Stage 1 differ from stock on the Hyundai i40?
Stage 1 on the Hyundai i40 2.0 MPI 153 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +4 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 MPI 153 hp?
Stage 1 on the Hyundai i40 2.0 MPI 153 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Hyundai i40 2.0 MPI 153 hp?
Stage 2 on the Hyundai i40 2.0 MPI 153 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Hyundai i40 2.0 MPI 153 hp have?
The Hyundai i40 2.0 MPI 153 hp has 4 ECU variants: Siemens/Continental SIM2K-240, Siemens/Continental SIM2K-241, Siemens/Continental SIM2K-242, Siemens/Continental SIM2K-341. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Hyundai i40?
Stage 1 on the Hyundai i40 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Hyundai i40 2.0 MPI 153 hp done?
The full remap cycle for the Hyundai i40 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Hyundai i40?
The original Hyundai i40 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Hyundai i40 2.0 MPI 153 hp?
The cost of Stage 1 for the Hyundai i40 2.0 MPI 153 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.