Hyundai i40 1.7 CRDI EU5 136 hp — Stage 1 file (+34 hp)
hp
Stage 1 file for Hyundai i40 1.7 CRDI EU5 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai i40 1.7 CRDI EU5 136 hp ECU
Hyundai i40 (2011) 1.7 CRDI EU5 136 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 136 to 170 hp (+34 hp, +25%) and torque from 325 to 380 Nm (+55 Nm). This engine ships with different ECU variants: Bosch EDC17C08, Bosch EDC17C53, Bosch EDC17C57, Bosch EDC17CP14. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2011 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Hyundai range covers compacts, saloons, crossovers, SUVs and commercial vehicles (HD). The Hyundai diesel range is shared with Kia and Genesis within the group.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
How much horsepower does Stage 1 add for the Hyundai i40 1.7 CRDI EU5 136 hp?
After Stage 1 the power of the Hyundai i40 1.7 CRDI EU5 136 hp rises from 136 to 170 hp, a gain of 34 hp (+25%). Torque rises from 325 to 380 Nm (+55 Nm).
How does Stage 1 differ from stock on the Hyundai i40?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai i40 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +34 hp with no hardware changes.
What is the risk of Stage 1 on the Hyundai i40 1.7 CRDI EU5 136 hp?
A remap of the Hyundai i40 1.7 CRDI EU5 136 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Hyundai i40 1.7 CRDI EU5 136 hp?
Stage 2 on the Hyundai i40 1.7 CRDI EU5 136 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Hyundai i40 1.7 CRDI EU5 136 hp built with?
The Hyundai i40 1.7 CRDI EU5 136 hp comes with 4 ECU variants: Bosch EDC17C08, Bosch EDC17C53, Bosch EDC17C57, Bosch EDC17CP14. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Hyundai i40 remain valid after Stage 1?
After remapping the Hyundai i40, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai i40?
Reading and writing via OBD takes 25-30 minutes on the Hyundai i40. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai i40?
Before Stage 1 the original of the Hyundai i40 1.7 CRDI EU5 136 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai i40 1.7 CRDI EU5 136 hp cost?
The remap price for the Hyundai i40 1.7 CRDI EU5 136 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.