Hyundai i30 1.6 CRDI EU5 126 hp — Stage 1 file (+22 hp)
hp
Stage 1 file for Hyundai i30 1.6 CRDI EU5 126 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai i30 1.6 CRDI EU5 126 hp ECU
Hyundai i30 (2011 - GD) 1.6 CRDI EU5 126 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 126 to 148 hp (+22 hp, +17%) and torque from 260 to 320 Nm (+60 Nm). This engine ships with different ECU variants: Bosch EDC17C08, Bosch EDC17C53, Bosch EDC17CP14. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A diesel built in 2011 — the Tricore ECU era; OBD flash works on most production revisions.
The Hyundai range covers compacts, saloons, crossovers, SUVs and commercial vehicles (HD). The Hyundai diesel range is shared with Kia and Genesis within the group.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Hyundai i30 1.6 CRDI EU5 126 hp?
Stage 1 chip tuning on the Hyundai i30 1.6 CRDI EU5 126 hp boosts engine output by 22 hp: from 126 to 148 hp. Torque rises from 260 to 320 Nm (+60 Nm).
What changes in the Hyundai i30 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai i30 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +22 hp with no hardware changes.
What is the risk of Stage 1 on the Hyundai i30 1.6 CRDI EU5 126 hp?
A remap of the Hyundai i30 1.6 CRDI EU5 126 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Hyundai i30 1.6 CRDI EU5 126 hp?
Stage 2 for the Hyundai i30 1.6 CRDI EU5 126 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Hyundai i30 1.6 CRDI EU5 126 hp built with?
The Hyundai i30 1.6 CRDI EU5 126 hp comes with 3 ECU variants: Bosch EDC17C08, Bosch EDC17C53, Bosch EDC17CP14. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Hyundai i30 remain valid after Stage 1?
After remapping the Hyundai i30, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai i30?
Reading and writing via OBD takes 25-30 minutes on the Hyundai i30. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai i30?
Before Stage 1 the original of the Hyundai i30 1.6 CRDI EU5 126 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai i30 1.6 CRDI EU5 126 hp cost?
The remap price for the Hyundai i30 1.6 CRDI EU5 126 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.