Hyundai i20 1.0 T-GDI 100 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Hyundai i20 1.0 T-GDI 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai i20 1.0 T-GDI 100 hp ECU
Hyundai i20 (2014 - GB/IB) 1.0 T-GDI 100 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 100 to 140 hp (+40 hp, +40%) and torque from 175 to 230 Nm (+55 Nm). This engine ships with different ECU variants: Kefico CPEGD2.20.1, Kefico CPEGD2.20.2, Kefico CPEGD2.20.3, Kefico CPEGD2.20.4, Kefico CPEGD2.20.x. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 5 configurations · 5 ECU variants. The 2014 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
N is Hyundai's performance division (i30 N, Elantra N, Kona N). Hyundai's factory calibration is mainstream and leaves headroom for Stage 1. T-GDI is Hyundai's badge for its direct-injection turbo petrol engines. The Hyundai N-series are sporting turbo engines for the i30 N, Elantra N and Kona N.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on the Hyundai T-GDI delivers a noticeable gain. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
How many horsepower does the Hyundai i20 1.0 T-GDI 100 hp reach after a remap?
After Stage 1 the power of the Hyundai i20 1.0 T-GDI 100 hp rises from 100 to 140 hp, a gain of 40 hp (+40%). Torque rises from 175 to 230 Nm (+55 Nm).
How does Stage 1 differ from stock on the Hyundai i20?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai i20 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
What is the risk of Stage 1 on the Hyundai i20 1.0 T-GDI 100 hp?
A remap of the Hyundai i20 1.0 T-GDI 100 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Hyundai i20 1.0 T-GDI 100 hp?
Stage 2 on the Hyundai i20 1.0 T-GDI 100 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Hyundai i20 1.0 T-GDI 100 hp built with?
The Hyundai i20 1.0 T-GDI 100 hp comes with 5 ECU variants: Kefico CPEGD2.20.1, Kefico CPEGD2.20.2, Kefico CPEGD2.20.3, Kefico CPEGD2.20.4, Kefico CPEGD2.20.x. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Hyundai i20 remain valid after Stage 1?
After remapping the Hyundai i20, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai i20?
Reading and writing via OBD takes 25-30 minutes on the Hyundai i20. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai i20?
Before Stage 1 the original of the Hyundai i20 1.0 T-GDI 100 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai i20 1.0 T-GDI 100 hp cost?
The remap price for the Hyundai i20 1.0 T-GDI 100 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.