Hyundai i10 1.2i 16v 86 hp — Stage 1 file (+7 hp)
hp
Stage 1 file for Hyundai i10 1.2i 16v 86 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai i10 1.2i 16v 86 hp ECU
Hyundai i10 (2007 - PA) 1.2i 16v 86 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 86 to 93 hp (+7 hp, +8%) and torque from 121 to 135 Nm (+14 Nm). This engine ships with different ECU variants: Bosch ME17.9.11, Kefico MEG17.9.12. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2007 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Hyundai is a Korean carmaker, founded in 1967 in Seoul. Smartstream is Hyundai's modern engine range with an emphasis on economy. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1. T-GDI is Hyundai's badge for its direct-injection turbo petrol engines.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. Low-output Hyundai engines are city units, and Stage 1 is safe. On naturally aspirated Hyundai engines, the main effect is on throttle response.
Frequently asked questions
What power gain do you get after chip tuning the Hyundai i10 1.2i 16v 86 hp?
After Stage 1 the power of the Hyundai i10 1.2i 16v 86 hp rises from 86 to 93 hp, a gain of 7 hp (+8%). Torque rises from 121 to 135 Nm (+14 Nm).
How does Stage 1 differ from stock on the Hyundai i10?
Stage 1 chip tuning of the Hyundai i10 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +7 hp with no hardware changes.
What does chip tuning give on the low-output Hyundai i10 1.2i 16v 86 hp?
Stage 1 on the base Hyundai i10 is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Hyundai i10?
Stage 2 on the Hyundai i10 1.2i 16v 86 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Hyundai i10 1.2i 16v 86 hp?
The Hyundai i10 1.2i 16v 86 hp was fitted with different ECUs depending on the year and trim: Bosch ME17.9.11, Kefico MEG17.9.12. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Hyundai i10 warranty after chip tuning?
The factory warranty of the Hyundai i10 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Hyundai i10 take?
On the Hyundai i10 1.2i 16v 86 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Hyundai i10?
Yes, the original ECU firmware of the Hyundai i10 1.2i 16v 86 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Hyundai i10?
Stage 1 for the Hyundai i10 1.2i 16v 86 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.