Hyundai HB20 1.6 MPI 130 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Hyundai HB20 1.6 MPI 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai HB20 1.6 MPI 130 hp ECU
Hyundai HB20 (2019 - BR2) 1.6 MPI 130 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 130 to 140 hp (+10 hp, +8%) and torque from 157 to 172 Nm (+15 Nm). This engine ships with different ECU variants: Bosch ME17.9.1, Bosch MED17.9.8. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A 2019 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Hyundai is a Korean carmaker, founded in 1967 in Seoul. Smartstream is Hyundai's modern engine range with an emphasis on economy. The Hyundai N-series are sporting turbo engines for the i30 N, Elantra N and Kona N. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on the Hyundai T-GDI delivers a noticeable gain. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe.
Frequently asked questions
How many horsepower does the Hyundai HB20 1.6 MPI 130 hp reach after a remap?
Stage 1 chip tuning on the Hyundai HB20 1.6 MPI 130 hp boosts engine output by 10 hp: from 130 to 140 hp. Torque rises from 157 to 172 Nm (+15 Nm).
What changes in the Hyundai HB20 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai HB20 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +10 hp with no hardware changes.
What is the risk of Stage 1 on the Hyundai HB20 1.6 MPI 130 hp?
A remap of the Hyundai HB20 1.6 MPI 130 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Hyundai HB20 1.6 MPI 130 hp?
Stage 2 for the Hyundai HB20 1.6 MPI 130 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Hyundai HB20 1.6 MPI 130 hp built with?
The Hyundai HB20 1.6 MPI 130 hp comes with 2 ECU variants: Bosch ME17.9.1, Bosch MED17.9.8. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Hyundai HB20 remain valid after Stage 1?
After remapping the Hyundai HB20, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai HB20?
Reading and writing via OBD takes 25-30 minutes on the Hyundai HB20. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai HB20?
Before Stage 1 the original of the Hyundai HB20 1.6 MPI 130 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai HB20 1.6 MPI 130 hp cost?
The remap price for the Hyundai HB20 1.6 MPI 130 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.