Hyundai H350 2.5 CRDI EU6 170 hp — Stage 1 file (+30 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Hyundai H350 2.5 CRDI EU6 170 hp ECU

Hyundai H350 (2016) 2.5 CRDI EU6 170 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 170 to 200 hp (+30 hp, +18%) and torque from 422 to 500 Nm (+78 Nm). This engine ships with different ECU variants: Bosch DCU17PC42, Denso MB275700. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.

The Hyundai range covers compacts, saloons, crossovers, SUVs and commercial vehicles (HD). The Hyundai diesel range is shared with Kia and Genesis within the group.

On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.

Frequently asked questions

How many horsepower does the Hyundai H350 2.5 CRDI EU6 170 hp reach after a remap?

The Stage 1 gain for the Hyundai H350 2.5 CRDI EU6 170 hp is 30 hp (+18%) over the stock 170 hp, for a total of 200 hp. Torque rises from 422 to 500 Nm (+78 Nm).

What is Stage 1 chip tuning for the Hyundai H350?

Stage 1 on the Hyundai H350 2.5 CRDI EU6 170 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.

Is a Stage 1 remap safe for the 2.5 CRDI EU6 170 hp?

Stage 1 on the Hyundai H350 2.5 CRDI EU6 170 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.

How does Stage 2 differ from Stage 1 on the Hyundai H350 2.5 CRDI EU6 170 hp?

Stage 2 on the Hyundai H350 2.5 CRDI EU6 170 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

How many ECU variants does the Hyundai H350 2.5 CRDI EU6 170 hp have?

The Hyundai H350 2.5 CRDI EU6 170 hp has 2 ECU variants: Bosch DCU17PC42, Denso MB275700. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.

Does Stage 1 void the warranty on the Hyundai H350?

Stage 1 on the Hyundai H350 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Hyundai H350 2.5 CRDI EU6 170 hp done?

The full remap cycle for the Hyundai H350 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Hyundai H350?

The original Hyundai H350 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Hyundai H350 2.5 CRDI EU6 170 hp?

The cost of Stage 1 for the Hyundai H350 2.5 CRDI EU6 170 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno