Hyundai H350 2.5 CRDI EU6 150 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Hyundai H350 2.5 CRDI EU6 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai H350 2.5 CRDI EU6 150 hp ECU
Hyundai H350 (2016) 2.5 CRDI EU6 150 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 150 to 200 hp (+50 hp, +33%) and torque from 373 to 450 Nm (+77 Nm). This engine ships with different ECU variants: Bosch DCU17PC42, Denso MB275700. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Hyundai is a Korean carmaker, founded in 1967 in Seoul. DPF/SCR with AdBlue is standard on Euro-6 Hyundai diesels.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
What power gain do you get after chip tuning the Hyundai H350 2.5 CRDI EU6 150 hp?
After Stage 1 the power of the Hyundai H350 2.5 CRDI EU6 150 hp rises from 150 to 200 hp, a gain of 50 hp (+33%). Torque rises from 373 to 450 Nm (+77 Nm).
How does Stage 1 differ from stock on the Hyundai H350?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai H350 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +50 hp with no hardware changes.
What is the risk of Stage 1 on the Hyundai H350 2.5 CRDI EU6 150 hp?
A remap of the Hyundai H350 2.5 CRDI EU6 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Hyundai H350 2.5 CRDI EU6 150 hp?
Stage 2 on the Hyundai H350 2.5 CRDI EU6 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Hyundai H350 2.5 CRDI EU6 150 hp built with?
The Hyundai H350 2.5 CRDI EU6 150 hp comes with 2 ECU variants: Bosch DCU17PC42, Denso MB275700. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Hyundai H350 remain valid after Stage 1?
After remapping the Hyundai H350, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai H350?
Reading and writing via OBD takes 25-30 minutes on the Hyundai H350. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai H350?
Before Stage 1 the original of the Hyundai H350 2.5 CRDI EU6 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai H350 2.5 CRDI EU6 150 hp cost?
The remap price for the Hyundai H350 2.5 CRDI EU6 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.