Hyundai Getz 1.5 CRDI 88 hp — Stage 1 file (+16 hp)
hp
Stage 1 file for Hyundai Getz 1.5 CRDI 88 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Getz 1.5 CRDI 88 hp ECU
Hyundai Getz (2005) 1.5 CRDI 88 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 88 to 104 hp (+16 hp, +18%) and torque from 215 to 250 Nm (+35 Nm). ECU — Bosch EDC15C7. Flashing method: OBD or Bench depending on the unit's protection. The 2005 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The Hyundai range covers compacts, saloons, crossovers, SUVs and commercial vehicles (HD). The Hyundai diesel range is shared with Kia and Genesis within the group.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. Low-output Hyundai engines are city units, and Stage 1 is safe. On naturally aspirated Hyundai engines, the main effect is on throttle response.
Frequently asked questions
How much horsepower does Stage 1 add for the Hyundai Getz 1.5 CRDI 88 hp?
After Stage 1 the power of the Hyundai Getz 1.5 CRDI 88 hp rises from 88 to 104 hp, a gain of 16 hp (+18%). Torque rises from 215 to 250 Nm (+35 Nm).
How does Stage 1 differ from stock on the Hyundai Getz?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai Getz with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +16 hp with no hardware changes.
Is Stage 1 worth doing on the base Hyundai Getz?
Stage 1 on the base Hyundai Getz is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Hyundai Getz 1.5 CRDI 88 hp?
Stage 2 on the Hyundai Getz 1.5 CRDI 88 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Hyundai Getz 1.5 CRDI 88 hp use?
The Hyundai Getz 1.5 CRDI 88 hp is fitted with the Bosch EDC15C7 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Hyundai Getz remain valid after Stage 1?
After remapping the Hyundai Getz, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai Getz?
Reading and writing via OBD takes 25-30 minutes on the Hyundai Getz. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai Getz?
Before Stage 1 the original of the Hyundai Getz 1.5 CRDI 88 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai Getz 1.5 CRDI 88 hp cost?
The remap price for the Hyundai Getz 1.5 CRDI 88 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.