Hyundai Elantra 1.6 DPI 122 hp — Stage 1 file (+2 hp)
hp
Stage 1 file for Hyundai Elantra 1.6 DPI 122 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Elantra 1.6 DPI 122 hp ECU
Hyundai Elantra (2020 - CN7) 1.6 DPI 122 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 122 to 124 hp (+2 hp, +2%) and torque from 153 to 156 Nm (+3 Nm). ECU — Kefico CPGPSH3.26.1. Flashing method: OBD or Bench depending on the unit's protection. A 2020 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
IONIQ is Hyundai's standalone electric brand (IONIQ 5, 6, 7). Hyundai's factory calibration is mainstream and leaves headroom for Stage 1. Hyundai turbo petrol engines deliver a noticeable gain with Stage 1. Modern Hyundai N engines usually require Bench.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on the Hyundai T-GDI delivers a noticeable gain. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe.
Frequently asked questions
What power gain do you get after chip tuning the Hyundai Elantra 1.6 DPI 122 hp?
Stage 1 chip tuning on the Hyundai Elantra 1.6 DPI 122 hp boosts engine output by 2 hp: from 122 to 124 hp. Torque rises from 153 to 156 Nm (+3 Nm).
What changes in the Hyundai Elantra ECU after Stage 1?
Stage 1 on the Hyundai Elantra 1.6 DPI 122 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +2 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 DPI 122 hp?
Stage 1 on the Hyundai Elantra 1.6 DPI 122 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Hyundai Elantra 1.6 DPI 122 hp?
Stage 2 for the Hyundai Elantra 1.6 DPI 122 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Hyundai Elantra 1.6 DPI 122 hp run?
The control unit of the Hyundai Elantra 1.6 DPI 122 hp is the Kefico CPGPSH3.26.1. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Hyundai Elantra?
Stage 1 on the Hyundai Elantra voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Hyundai Elantra 1.6 DPI 122 hp done?
The full remap cycle for the Hyundai Elantra — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Hyundai Elantra?
The original Hyundai Elantra ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Hyundai Elantra 1.6 DPI 122 hp?
The cost of Stage 1 for the Hyundai Elantra 1.6 DPI 122 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.