Hyundai Elantra 1.5 MPI 115 hp — Stage 1 file (+3 hp)
hp
Stage 1 file for Hyundai Elantra 1.5 MPI 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Elantra 1.5 MPI 115 hp ECU
Hyundai Elantra (2020 - CN7) 1.5 MPI 115 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 115 to 118 hp (+3 hp, +3%) and torque from 144 to 150 Nm (+6 Nm). ECU — Kefico CPEGP3.20.1. Flashing method: OBD or Bench depending on the unit's protection. A modern petrol engine built in 2020 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
N is Hyundai's performance division (i30 N, Elantra N, Kona N). T-GDI is Hyundai's badge for its direct-injection turbo petrol engines. Smartstream is Hyundai's modern engine range with an emphasis on economy. The Hyundai N-series are sporting turbo engines for the i30 N, Elantra N and Kona N.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on the Hyundai T-GDI delivers a noticeable gain. Protection on modern Hyundai N models is tough and requires Bench. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
What is the Stage 1 effect on the Hyundai Elantra 1.5 MPI 115 hp?
After Stage 1 the power of the Hyundai Elantra 1.5 MPI 115 hp rises from 115 to 118 hp, a gain of 3 hp (+3%). Torque rises from 144 to 150 Nm (+6 Nm).
How does Stage 1 differ from stock on the Hyundai Elantra?
Stage 1 on the Hyundai Elantra 1.5 MPI 115 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +3 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.5 MPI 115 hp?
Stage 1 on the Hyundai Elantra 1.5 MPI 115 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Hyundai Elantra 1.5 MPI 115 hp?
Stage 2 on the Hyundai Elantra 1.5 MPI 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Hyundai Elantra 1.5 MPI 115 hp run?
The control unit of the Hyundai Elantra 1.5 MPI 115 hp is the Kefico CPEGP3.20.1. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Hyundai Elantra?
Stage 1 on the Hyundai Elantra voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Hyundai Elantra 1.5 MPI 115 hp done?
The full remap cycle for the Hyundai Elantra — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Hyundai Elantra?
The original Hyundai Elantra ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Hyundai Elantra 1.5 MPI 115 hp?
The cost of Stage 1 for the Hyundai Elantra 1.5 MPI 115 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.