Hyundai Elantra 1.8i 150 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Hyundai Elantra 1.8i 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Elantra 1.8i 150 hp ECU
Hyundai Elantra (2010 - MD/UD/JK) 1.8i 150 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 150 to 160 hp (+10 hp, +7%) and torque from 178 to 188 Nm (+10 Nm). ECU — Siemens/Continental SIM2K-241. Flashing method: OBD or Bench depending on the unit's protection. The 2010 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Hyundai is the core of the Hyundai Motor Group. Hyundai turbo petrol engines deliver a noticeable gain with Stage 1. Smartstream is Hyundai's modern engine range with an emphasis on economy. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1.
On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
What is the Stage 1 effect on the Hyundai Elantra 1.8i 150 hp?
The Stage 1 gain for the Hyundai Elantra 1.8i 150 hp is 10 hp (+7%) over the stock 150 hp, for a total of 160 hp. Torque rises from 178 to 188 Nm (+10 Nm).
What is Stage 1 chip tuning for the Hyundai Elantra?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai Elantra with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +10 hp with no hardware changes.
What is the risk of Stage 1 on the Hyundai Elantra 1.8i 150 hp?
A remap of the Hyundai Elantra 1.8i 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Hyundai Elantra 1.8i 150 hp?
Stage 2 on the Hyundai Elantra 1.8i 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Hyundai Elantra 1.8i 150 hp use?
The Hyundai Elantra 1.8i 150 hp is fitted with the Siemens/Continental SIM2K-241 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Hyundai Elantra remain valid after Stage 1?
After remapping the Hyundai Elantra, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai Elantra?
Reading and writing via OBD takes 25-30 minutes on the Hyundai Elantra. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai Elantra?
Before Stage 1 the original of the Hyundai Elantra 1.8i 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai Elantra 1.8i 150 hp cost?
The remap price for the Hyundai Elantra 1.8i 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.