Hyundai Creta 1.6 DPI 122 hp — Stage 1 file (+2 hp)
hp
Stage 1 file for Hyundai Creta 1.6 DPI 122 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Creta 1.6 DPI 122 hp ECU
Hyundai Creta (2019 - SU2) 1.6 DPI 122 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 122 to 124 hp (+2 hp, +2%) and torque from 153 to 156 Nm (+3 Nm). ECU — Kefico CPGPSH3.26.1. Flashing method: OBD or Bench depending on the unit's protection. A modern petrol engine built in 2019 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Hyundai shares platforms and engines with Kia and Genesis. T-GDI is Hyundai's badge for its direct-injection turbo petrol engines. Smartstream is Hyundai's modern engine range with an emphasis on economy. The Hyundai N-series are sporting turbo engines for the i30 N, Elantra N and Kona N.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on the Hyundai T-GDI delivers a noticeable gain. Protection on modern Hyundai N models is tough and requires Bench. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
How much does the power of the Hyundai Creta 1.6 DPI 122 hp increase after Stage 1?
After Stage 1 the power of the Hyundai Creta 1.6 DPI 122 hp rises from 122 to 124 hp, a gain of 2 hp (+2%). Torque rises from 153 to 156 Nm (+3 Nm).
How does Stage 1 differ from stock on the Hyundai Creta?
Stage 1 on the Hyundai Creta 1.6 DPI 122 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +2 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 DPI 122 hp?
Stage 1 on the Hyundai Creta 1.6 DPI 122 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Hyundai Creta 1.6 DPI 122 hp?
Stage 2 on the Hyundai Creta 1.6 DPI 122 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Hyundai Creta 1.6 DPI 122 hp run?
The control unit of the Hyundai Creta 1.6 DPI 122 hp is the Kefico CPGPSH3.26.1. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Hyundai Creta?
Stage 1 on the Hyundai Creta voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Hyundai Creta 1.6 DPI 122 hp done?
The full remap cycle for the Hyundai Creta — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Hyundai Creta?
The original Hyundai Creta ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Hyundai Creta 1.6 DPI 122 hp?
The cost of Stage 1 for the Hyundai Creta 1.6 DPI 122 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.