Hawtai Terracan 2.4 MPI 179 hp — Stage 1 file (+6 hp)
hp
Stage 1 file for Hawtai Terracan 2.4 MPI 179 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hawtai Terracan 2.4 MPI 179 hp ECU
Hawtai Terracan (2012) 2.4 MPI 179 hp — mass-market petrol engine of the passenger segment of the Hawtai Motor Group group (Китай, 2000). Stage 1 chip tuning raises power from 179 to 185 hp (+6 hp, +3%) and torque from 230 to 235 Nm (+5 Nm). This engine ships with different ECU variants: Siemens/Continental SIM2K-141, Siemens/Continental SIM2K-142, Siemens/Continental SIM2K-240, Siemens/Continental SIM2K-241, Siemens/Continental SIM2K-341. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 5 configurations · 5 ECU variants. A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
Hawtai focuses on the mass market — saloons, crossovers and SUVs. Hawtai is a mass-market Chinese brand specialising in SUVs. Hawtai is part of the Hawtai Motor Group. Mid-range turbo petrol engines respond to Stage 1 with a noticeable gain. Hawtai's petrol range consists mainly of mainstream-segment turbo engines. The factory calibration is conservative, leaving headroom for Stage 1.
Stage 1 on petrol engines delivers a noticeable gain. The Hawtai community in China and the CIS is a growing chip tuning market. Mid-range Hawtai — a high-volume chip tuning subject in a growing market.
Frequently asked questions
How much does the power of the Hawtai Terracan 2.4 MPI 179 hp increase after Stage 1?
Stage 1 for the Hawtai Terracan 2.4 MPI 179 hp adds +6 hp — power increases from 179 to 185 hp (+3%). Torque rises from 230 to 235 Nm (+5 Nm).
What does a Stage 1 remap of the Hawtai Terracan 2.4 MPI 179 hp include?
Stage 1 chip tuning of the Hawtai Terracan is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +6 hp with no hardware changes.
Can you do Stage 1 on the Hawtai Terracan 2.4 MPI 179 hp?
Yes, Stage 1 for the Hawtai Terracan 2.4 MPI 179 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Hawtai Terracan?
Stage 2 for the Hawtai Terracan 2.4 MPI 179 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Hawtai Terracan 2.4 MPI 179 hp?
The Hawtai Terracan 2.4 MPI 179 hp was fitted with different ECUs depending on the year and trim: Siemens/Continental SIM2K-141, Siemens/Continental SIM2K-142, Siemens/Continental SIM2K-240, Siemens/Continental SIM2K-241, Siemens/Continental SIM2K-341. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Hawtai Terracan warranty after chip tuning?
The factory warranty of the Hawtai Terracan does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Hawtai Terracan take?
On the Hawtai Terracan 2.4 MPI 179 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Hawtai Terracan?
Yes, the original ECU firmware of the Hawtai Terracan 2.4 MPI 179 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Hawtai Terracan?
Stage 1 for the Hawtai Terracan 2.4 MPI 179 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.