GMC Sierra 6.2 V8 420 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for GMC Sierra 6.2 V8 420 hp
Target +0 hp. Custom development for your engine.
Chip tuning for GMC Sierra 6.2 V8 420 hp ECU
GMC Sierra (2017) 6.2 V8 420 hp — mass-market petrol engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 420 to 445 hp (+25 hp, +6%) and torque from 623 to 649 Nm (+26 Nm). This engine ships with different ECU variants: Delco E38, Delco E92, Delco T87. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
GMC is an American pickup and SUV brand, part of General Motors since 1909. GMC specialises in premium pickups (Sierra) and large SUVs (Yukon, Hummer EV). GMC shares platforms and engines with Chevrolet within GM. Camaro SS / ZL1 / Corvette offer significant potential with hardware. Corvette Z06 / ZR1 form a calibration segment of their own. The LS-series V8 is Chevrolet's iconic engine range dating from 1997.
The US Chevrolet community is the largest for Camaro, Corvette and LS-swaps. Camaro/Corvette confidently reach Stage 2 with hardware. LS-swap is an industry of its own (Chevy LS engines into any car). Top Chevrolet Corvette / Camaro ZL1 engines sit at the power ceiling of the American performance segment. HP Tuners is the leading tool for top Chevrolet models.
Frequently asked questions
How many horsepower does the GMC Sierra 6.2 V8 420 hp reach after a remap?
After Stage 1 the power of the GMC Sierra 6.2 V8 420 hp rises from 420 to 445 hp, a gain of 25 hp (+6%). Torque rises from 623 to 649 Nm (+26 Nm).
How does Stage 1 differ from stock on the GMC Sierra?
Stage 1 is a software optimization of the factory ECU firmware of the GMC Sierra with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Does Stage 1 make sense on the GMC Sierra 6.2 V8 420 hp with this much power?
Stage 1 for the GMC Sierra 6.2 V8 420 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the GMC Sierra 6.2 V8 420 hp?
Stage 2 on the GMC Sierra 6.2 V8 420 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the GMC Sierra 6.2 V8 420 hp built with?
The GMC Sierra 6.2 V8 420 hp comes with 3 ECU variants: Delco E38, Delco E92, Delco T87. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the GMC Sierra remain valid after Stage 1?
After remapping the GMC Sierra, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the GMC Sierra?
Reading and writing via OBD takes 25-30 minutes on the GMC Sierra. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the GMC Sierra?
Before Stage 1 the original of the GMC Sierra 6.2 V8 420 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the GMC Sierra 6.2 V8 420 hp cost?
The remap price for the GMC Sierra 6.2 V8 420 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.