GMC Savana 4.3i V6 285 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for GMC Savana 4.3i V6 285 hp
Target +0 hp. Custom development for your engine.
Chip tuning for GMC Savana 4.3i V6 285 hp ECU
GMC Savana (2018) 4.3i V6 285 hp — mass-market petrol engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 285 to 295 hp (+10 hp, +4%) and torque from 413 to 423 Nm (+10 Nm). This engine ships with different ECU variants: Delco E92, Delco T87, Delco T87A. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A modern petrol engine built in 2018 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
GMC is an American pickup and SUV brand, part of General Motors since 1909. GMC specialises in premium pickups (Sierra) and large SUVs (Yukon, Hummer EV). GMC shares platforms and engines with Chevrolet within GM. The LS-series V8 is Chevrolet's iconic engine range dating from 1997. Chevrolet 2.0 / 1.4 Turbo are mainstream turbo engines for saloons and compacts. Camaro 2.0/3.6 delivers a solid gain with Stage 1.
LS-swap is an industry of its own (Chevy LS engines into any car). The US Chevrolet community is the largest for Camaro, Corvette and LS-swaps. HP Tuners is the primary tool for Chevrolet/GM in the US. High-output Chevrolet Camaro / Silverado offer solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the GMC Savana 4.3i V6 285 hp?
The Stage 1 gain for the GMC Savana 4.3i V6 285 hp is 10 hp (+4%) over the stock 285 hp, for a total of 295 hp. Torque rises from 413 to 423 Nm (+10 Nm).
What is Stage 1 chip tuning for the GMC Savana?
Stage 1 is a software optimization of the factory ECU firmware of the GMC Savana with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +10 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the GMC Savana?
The high-output GMC Savana 4.3i V6 285 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the GMC Savana 4.3i V6 285 hp?
Stage 2 on the GMC Savana 4.3i V6 285 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the GMC Savana 4.3i V6 285 hp built with?
The GMC Savana 4.3i V6 285 hp comes with 3 ECU variants: Delco E92, Delco T87, Delco T87A. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the GMC Savana remain valid after Stage 1?
After remapping the GMC Savana, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the GMC Savana?
Reading and writing via OBD takes 25-30 minutes on the GMC Savana. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the GMC Savana?
Before Stage 1 the original of the GMC Savana 4.3i V6 285 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the GMC Savana 4.3i V6 285 hp cost?
The remap price for the GMC Savana 4.3i V6 285 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.