GMC Canyon 3.6 V6 323 hp — Stage 1 file (+2 hp)
hp
Stage 1 file for GMC Canyon 3.6 V6 323 hp
Target +0 hp. Custom development for your engine.
Chip tuning for GMC Canyon 3.6 V6 323 hp ECU
GMC Canyon (2013) 3.6 V6 323 hp — mass-market petrol engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 323 to 325 hp (+2 hp, +1%) and torque from 375 to 390 Nm (+15 Nm). This engine ships with different ECU variants: Delco E82, Delco T87A. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2013 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
GMC specialises in premium pickups (Sierra) and large SUVs (Yukon, Hummer EV). GMC shares platforms and engines with Chevrolet within GM. GMC is an American pickup and SUV brand, part of General Motors since 1909. GM ECUs (E78/E80/E92) are Bosch-based but use their own checksum. The LS-series V8 is Chevrolet's iconic engine range dating from 1997. Chevrolet 2.0 / 1.4 Turbo are mainstream turbo engines for saloons and compacts.
The US Chevrolet community is the largest for Camaro, Corvette and LS-swaps. HP Tuners is the primary tool for Chevrolet/GM in the US. LS-swap is an industry of its own (Chevy LS engines into any car). High-output Chevrolet Camaro / Silverado offer solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the GMC Canyon 3.6 V6 323 hp reach after a remap?
After Stage 1 the power of the GMC Canyon 3.6 V6 323 hp rises from 323 to 325 hp, a gain of 2 hp (+1%). Torque rises from 375 to 390 Nm (+15 Nm).
How does Stage 1 differ from stock on the GMC Canyon?
Stage 1 chip tuning of the GMC Canyon is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +2 hp with no hardware changes.
Is Stage 1 safe on the high-output GMC Canyon 3.6 V6 323 hp?
The high-output GMC Canyon 3.6 V6 323 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How much does Stage 2 add on the GMC Canyon?
Stage 2 on the GMC Canyon 3.6 V6 323 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the GMC Canyon 3.6 V6 323 hp?
The GMC Canyon 3.6 V6 323 hp was fitted with different ECUs depending on the year and trim: Delco E82, Delco T87A. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the GMC Canyon warranty after chip tuning?
The factory warranty of the GMC Canyon does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the GMC Canyon take?
On the GMC Canyon 3.6 V6 323 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the GMC Canyon?
Yes, the original ECU firmware of the GMC Canyon 3.6 V6 323 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the GMC Canyon?
Stage 1 for the GMC Canyon 3.6 V6 323 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.