Genesis GV80 3.5 T-GDI 380 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Genesis GV80 3.5 T-GDI 380 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Genesis GV80 3.5 T-GDI 380 hp ECU
Genesis GV80 (2020) 3.5 T-GDI 380 hp — premium petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 380 to 410 hp (+30 hp, +8%) and torque from 540 to 600 Nm (+60 Nm). A 2020 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Genesis shares platforms and engines with the Hyundai N series. The Genesis range comprises premium saloons (G70, G80, G90) and SUVs (GV60, GV70, GV80). Genesis is positioned as a Korean rival to Mercedes, BMW and Audi. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1. Top Hyundai N engines offer significant potential with a downpipe + intake. Modern Hyundai N engines usually require Bench.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. Protection on modern Hyundai N models is tough and requires Bench. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. The N-series confidently reaches Stage 2 with hardware. Top Hyundai N engines sit at the power ceiling of the Korean performance segment.
Frequently asked questions
How much horsepower does Stage 1 add for the Genesis GV80 3.5 T-GDI 380 hp?
Stage 1 for the Genesis GV80 3.5 T-GDI 380 hp adds +30 hp — power increases from 380 to 410 hp (+8%). Torque rises from 540 to 600 Nm (+60 Nm).
What does a Stage 1 remap of the Genesis GV80 3.5 T-GDI 380 hp include?
Stage 1 on the Genesis GV80 3.5 T-GDI 380 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
What does Stage 1 give on the top-spec Genesis GV80 3.5 T-GDI 380 hp?
On the top-spec Genesis GV80 3.5 T-GDI 380 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the Genesis GV80 3.5 T-GDI 380 hp?
Stage 2 for the Genesis GV80 3.5 T-GDI 380 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Genesis GV80?
Stage 1 on the Genesis GV80 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Genesis GV80 3.5 T-GDI 380 hp done?
The full remap cycle for the Genesis GV80 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Genesis GV80?
The original Genesis GV80 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Genesis GV80 3.5 T-GDI 380 hp?
The cost of Stage 1 for the Genesis GV80 3.5 T-GDI 380 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.