Genesis GV80 3.0 CRDI (smartstream) 278 hp — Stage 1 file (+32 hp)
hp
Stage 1 file for Genesis GV80 3.0 CRDI (smartstream) 278 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Genesis GV80 3.0 CRDI (smartstream) 278 hp ECU
Genesis GV80 (2020) 3.0 CRDI (smartstream) 278 hp — premium diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 278 to 310 hp (+32 hp, +12%) and torque from 588 to 660 Nm (+72 Nm). ECU — Bosch MD1CS012. Flashing method: OBD or Bench depending on the unit's protection. A 2020 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
Genesis shares platforms and engines with the Hyundai N series. The Genesis range comprises premium saloons (G70, G80, G90) and SUVs (GV60, GV70, GV80). Genesis is positioned as a Korean rival to Mercedes, BMW and Audi. High-output Hyundai diesels are the top Santa Fe and Tucson versions.
Protection on modern Hyundai N models is tough and requires Bench. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. High-output Hyundais are the N-series and Santa Fe, with solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Genesis GV80 3.0 CRDI (smartstream) 278 hp?
Stage 1 for the Genesis GV80 3.0 CRDI (smartstream) 278 hp adds +32 hp — power increases from 278 to 310 hp (+12%). Torque rises from 588 to 660 Nm (+72 Nm).
What does a Stage 1 remap of the Genesis GV80 3.0 CRDI (smartstream) 278 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Genesis GV80 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +32 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Genesis GV80?
Stage 1 on the powerful Genesis GV80 3.0 CRDI (smartstream) 278 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Genesis GV80 3.0 CRDI (smartstream) 278 hp?
Stage 2 for the Genesis GV80 3.0 CRDI (smartstream) 278 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Genesis GV80 3.0 CRDI (smartstream) 278 hp use?
The Genesis GV80 3.0 CRDI (smartstream) 278 hp is fitted with the Bosch MD1CS012 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Genesis GV80 remain valid after Stage 1?
After remapping the Genesis GV80, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Genesis GV80?
Reading and writing via OBD takes 25-30 minutes on the Genesis GV80. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Genesis GV80?
Before Stage 1 the original of the Genesis GV80 3.0 CRDI (smartstream) 278 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Genesis GV80 3.0 CRDI (smartstream) 278 hp cost?
The remap price for the Genesis GV80 3.0 CRDI (smartstream) 278 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.