Genesis G80 2.2 CRDI EU6 202 hp — Stage 1 file (+28 hp)
hp
Stage 1 file for Genesis G80 2.2 CRDI EU6 202 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Genesis G80 2.2 CRDI EU6 202 hp ECU
Genesis G80 (2016) 2.2 CRDI EU6 202 hp — premium diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 202 to 230 hp (+28 hp, +14%) and torque from 440 to 520 Nm (+80 Nm). This engine ships with different ECU variants: Bosch EDC17C57, Bosch MD1CS012. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A diesel built in 2016 — the Tricore ECU era; OBD flash works on most production revisions.
Genesis is positioned as a Korean rival to Mercedes, BMW and Audi. Genesis is the premium sub-brand of the Hyundai Motor Group, launched in 2015 as a standalone brand. Genesis shares platforms and engines with the Hyundai N series. CRDi is Hyundai's badge for its direct-injection turbo diesels.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. High-output Hyundais are the N-series and Santa Fe, with solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Genesis G80 2.2 CRDI EU6 202 hp?
Stage 1 chip tuning on the Genesis G80 2.2 CRDI EU6 202 hp boosts engine output by 28 hp: from 202 to 230 hp. Torque rises from 440 to 520 Nm (+80 Nm).
What changes in the Genesis G80 ECU after Stage 1?
Stage 1 on the Genesis G80 2.2 CRDI EU6 202 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +28 hp with no hardware changes.
What does Stage 1 give on the powerful Genesis G80 2.2 CRDI EU6 202 hp?
Stage 1 on the powerful Genesis G80 2.2 CRDI EU6 202 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Genesis G80 2.2 CRDI EU6 202 hp?
Stage 2 for the Genesis G80 2.2 CRDI EU6 202 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Genesis G80 2.2 CRDI EU6 202 hp have?
The Genesis G80 2.2 CRDI EU6 202 hp has 2 ECU variants: Bosch EDC17C57, Bosch MD1CS012. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Genesis G80?
Stage 1 on the Genesis G80 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Genesis G80 2.2 CRDI EU6 202 hp done?
The full remap cycle for the Genesis G80 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Genesis G80?
The original Genesis G80 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Genesis G80 2.2 CRDI EU6 202 hp?
The cost of Stage 1 for the Genesis G80 2.2 CRDI EU6 202 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.