Genesis G70 2.2 CRDI EU6 202 hp — Stage 1 file (+28 hp)
hp
Stage 1 file for Genesis G70 2.2 CRDI EU6 202 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Genesis G70 2.2 CRDI EU6 202 hp ECU
Genesis G70 (2017) 2.2 CRDI EU6 202 hp — premium diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 202 to 230 hp (+28 hp, +14%) and torque from 440 to 520 Nm (+80 Nm). This engine ships with different ECU variants: Bosch EDC17C57, Bosch MD1CS012. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2017 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Genesis is the premium sub-brand of the Hyundai Motor Group, launched in 2015 as a standalone brand. Genesis shares platforms and engines with the Hyundai N series. The Genesis range comprises premium saloons (G70, G80, G90) and SUVs (GV60, GV70, GV80). Mid-generation diesel models use standard OBD read/write.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. High-output Hyundais are the N-series and Santa Fe, with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Genesis G70 2.2 CRDI EU6 202 hp reach after a remap?
After Stage 1 the power of the Genesis G70 2.2 CRDI EU6 202 hp rises from 202 to 230 hp, a gain of 28 hp (+14%). Torque rises from 440 to 520 Nm (+80 Nm).
How does Stage 1 differ from stock on the Genesis G70?
Stage 1 on the Genesis G70 2.2 CRDI EU6 202 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +28 hp with no hardware changes.
What does Stage 1 give on the powerful Genesis G70 2.2 CRDI EU6 202 hp?
The high-output Genesis G70 2.2 CRDI EU6 202 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Genesis G70 2.2 CRDI EU6 202 hp?
Stage 2 on the Genesis G70 2.2 CRDI EU6 202 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Genesis G70 2.2 CRDI EU6 202 hp have?
The Genesis G70 2.2 CRDI EU6 202 hp has 2 ECU variants: Bosch EDC17C57, Bosch MD1CS012. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Genesis G70?
Stage 1 on the Genesis G70 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Genesis G70 2.2 CRDI EU6 202 hp done?
The full remap cycle for the Genesis G70 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Genesis G70?
The original Genesis G70 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Genesis G70 2.2 CRDI EU6 202 hp?
The cost of Stage 1 for the Genesis G70 2.2 CRDI EU6 202 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.