Genesis G70 2.0 T 255 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Genesis G70 2.0 T 255 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Genesis G70 2.0 T 255 hp ECU
Genesis G70 (2017) 2.0 T 255 hp — premium petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 255 to 290 hp (+35 hp, +14%) and torque from 353 to 410 Nm (+57 Nm). ECU — Siemens/Continental SIM2K. Flashing method: OBD or Bench depending on the unit's protection. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Genesis is the premium sub-brand of the Hyundai Motor Group, launched in 2015 as a standalone brand. Genesis shares platforms and engines with the Hyundai N series. The Genesis range comprises premium saloons (G70, G80, G90) and SUVs (GV60, GV70, GV80). Smartstream is Hyundai's modern engine range with an emphasis on economy. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1. T-GDI is Hyundai's badge for its direct-injection turbo petrol engines.
On older-generation Hyundais, Stage 1 goes in over OBD without Bench. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. High-output Hyundais are the N-series and Santa Fe, with solid headroom for Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Genesis G70 2.0 T 255 hp?
After Stage 1 the power of the Genesis G70 2.0 T 255 hp rises from 255 to 290 hp, a gain of 35 hp (+14%). Torque rises from 353 to 410 Nm (+57 Nm).
How does Stage 1 differ from stock on the Genesis G70?
Stage 1 is a software optimization of the factory ECU firmware of the Genesis G70 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Genesis G70?
The high-output Genesis G70 2.0 T 255 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Genesis G70 2.0 T 255 hp?
Stage 2 on the Genesis G70 2.0 T 255 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Genesis G70 2.0 T 255 hp use?
The Genesis G70 2.0 T 255 hp is fitted with the Siemens/Continental SIM2K ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Genesis G70 remain valid after Stage 1?
After remapping the Genesis G70, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Genesis G70?
Reading and writing via OBD takes 25-30 minutes on the Genesis G70. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Genesis G70?
Before Stage 1 the original of the Genesis G70 2.0 T 255 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Genesis G70 2.0 T 255 hp cost?
The remap price for the Genesis G70 2.0 T 255 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.