Freightliner Century MBE 4000 12.8L 435hp (320kW) 1964Nm — Stage 1 file (+57 hp)
hp
Stage 1 file for Freightliner Century MBE 4000 12.8L 435hp (320kW) 1964Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Freightliner Century MBE 4000 12.8L 435hp (320kW) 1964Nm ECU
Freightliner Century (I (1996+)) MBE 4000 12.8L 435hp (320kW) 1964Nm — commercial diesel engine of the commercial segment of the Daimler Truck group (США, 1942). Stage 1 chip tuning raises power from 435 to 492 hp (+57 hp, +13%) and torque from 1964 to 2154 Nm (+190 Nm). The 1996 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Freightliner is the largest Class 8 tractor manufacturer in the US. Freightliner is part of Daimler Truck. Freightliner is an American truck manufacturer, founded in 1942. Truck diesels carry an extended set of maps for commercial load, with the focus on torque. DPF/SCR with AdBlue is standard on modern Euro-6 truck engines. Truck chip tuning is a discipline of its own, focused on fuel consumption and pulling power rather than peak output.
The professional logistics segment tunes for fuel consumption and pulling characteristics. The truck chip tuning community is an industry of its own, focused on long-haul routes. Top MAN units sit at the power ceiling of the European truck segment.
Frequently asked questions
How many horsepower does the Freightliner Century MBE 4000 12.8L 435hp (320kW) 1964Nm reach after a remap?
The Stage 1 gain for the Freightliner Century MBE 4000 12.8L 435hp (320kW) 1964Nm is 57 hp (+13%) over the stock 435 hp, for a total of 492 hp. Torque rises from 1964 to 2154 Nm (+190 Nm).
What is Stage 1 chip tuning for the Freightliner Century?
Stage 1 on the Freightliner Century MBE 4000 12.8L 435hp (320kW) 1964Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +57 hp with no hardware changes.
What does Stage 1 give on the top-spec Freightliner Century MBE 4000 12.8L 435hp (320kW) 1964Nm?
Stage 1 for the Freightliner Century MBE 4000 12.8L 435hp (320kW) 1964Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How does Stage 2 differ from Stage 1 on the Freightliner Century MBE 4000 12.8L 435hp (320kW) 1964Nm?
Stage 2 on the Freightliner Century MBE 4000 12.8L 435hp (320kW) 1964Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Freightliner Century?
Stage 1 on the Freightliner Century voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Freightliner Century MBE 4000 12.8L 435hp (320kW) 1964Nm done?
The full remap cycle for the Freightliner Century — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Freightliner Century?
The original Freightliner Century ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Freightliner Century MBE 4000 12.8L 435hp (320kW) 1964Nm?
The cost of Stage 1 for the Freightliner Century MBE 4000 12.8L 435hp (320kW) 1964Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.