Ford Transit Connect 1.5 TDCI EU6 100 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Ford Transit Connect 1.5 TDCI EU6 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford Transit Connect 1.5 TDCI EU6 100 hp ECU
Ford Transit Connect (2016) 1.5 TDCI EU6 100 hp — mass-market diesel engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 100 to 120 hp (+20 hp, +20%) and torque from 215 to 275 Nm (+60 Nm). ECU — Bosch MD1CS005. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2016 — the Tricore ECU era; OBD flash works on most production revisions.
EcoBoost is Ford's own range of turbocharged engines. Ford Motor Company includes Lincoln as its premium sub-brand. Ford pioneered mass assembly-line car production. The Ford Transit is the best-selling commercial diesel in Europe.
Stage 1 on TDCi/Transit engines delivers a noticeable torque gain. Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. The Ford Transit and Ranger are Ford's best-selling commercial diesels in Europe. Mid-range Ford models with EcoBoost are a mainstream chip tuning subject.
Frequently asked questions
How much horsepower does Stage 1 add for the Ford Transit Connect 1.5 TDCI EU6 100 hp?
Stage 1 for the Ford Transit Connect 1.5 TDCI EU6 100 hp adds +20 hp — power increases from 100 to 120 hp (+20%). Torque rises from 215 to 275 Nm (+60 Nm).
What does a Stage 1 remap of the Ford Transit Connect 1.5 TDCI EU6 100 hp include?
Stage 1 on the Ford Transit Connect 1.5 TDCI EU6 100 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.5 TDCI EU6 100 hp?
Stage 1 on the Ford Transit Connect 1.5 TDCI EU6 100 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Ford Transit Connect 1.5 TDCI EU6 100 hp?
Stage 2 for the Ford Transit Connect 1.5 TDCI EU6 100 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Ford Transit Connect 1.5 TDCI EU6 100 hp run?
The control unit of the Ford Transit Connect 1.5 TDCI EU6 100 hp is the Bosch MD1CS005. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Ford Transit Connect?
Stage 1 on the Ford Transit Connect voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Ford Transit Connect 1.5 TDCI EU6 100 hp done?
The full remap cycle for the Ford Transit Connect — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Ford Transit Connect?
The original Ford Transit Connect ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Ford Transit Connect 1.5 TDCI EU6 100 hp?
The cost of Stage 1 for the Ford Transit Connect 1.5 TDCI EU6 100 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.