Ford Transit Connect 1.6 TDCI EU5 (2004) 95 hp — Stage 1 file (+30 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Ford Transit Connect 1.6 TDCI EU5 (2004) 95 hp ECU

Ford Transit Connect (2013) 1.6 TDCI EU5 (2004) 95 hp — mass-market diesel engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 95 to 125 hp (+30 hp, +32%) and torque from 230 to 310 Nm (+80 Nm). ECU — Siemens/Continental SID807EVO. Flashing method: OBD or Bench depending on the unit's protection. The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.

Ford Motor Company includes Lincoln as its premium sub-brand. Ford pioneered mass assembly-line car production. Ford is an American carmaker, founded in 1903 by Henry Ford. Ford Power Stroke is a diesel range for pickups and SUVs (mainly the US). TDCi is Ford's turbo diesel range for Europe. DPF/SCR with AdBlue is standard on Euro-6 Ford diesels.

The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. Low-output Fords are naturally aspirated city cars, and Stage 1 is safe.

Frequently asked questions

What power gain do you get after chip tuning the Ford Transit Connect 1.6 TDCI EU5 (2004) 95 hp?

The Stage 1 gain for the Ford Transit Connect 1.6 TDCI EU5 (2004) 95 hp is 30 hp (+32%) over the stock 95 hp, for a total of 125 hp. Torque rises from 230 to 310 Nm (+80 Nm).

What is Stage 1 chip tuning for the Ford Transit Connect?

Stage 1 on the Ford Transit Connect 1.6 TDCI EU5 (2004) 95 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.

Is Stage 1 safe for the low-output Ford Transit Connect 1.6 TDCI EU5 (2004) 95 hp?

Stage 1 on the base Ford Transit Connect is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.

How does Stage 2 differ from Stage 1 on the Ford Transit Connect 1.6 TDCI EU5 (2004) 95 hp?

Stage 2 on the Ford Transit Connect 1.6 TDCI EU5 (2004) 95 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

What control unit does the Ford Transit Connect 1.6 TDCI EU5 (2004) 95 hp run?

The control unit of the Ford Transit Connect 1.6 TDCI EU5 (2004) 95 hp is the Siemens/Continental SID807EVO. Before flashing, the engineer identifies the exact revision and selects the write method.

Does Stage 1 void the warranty on the Ford Transit Connect?

Stage 1 on the Ford Transit Connect voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Ford Transit Connect 1.6 TDCI EU5 (2004) 95 hp done?

The full remap cycle for the Ford Transit Connect — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Ford Transit Connect?

The original Ford Transit Connect ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Ford Transit Connect 1.6 TDCI EU5 (2004) 95 hp?

The cost of Stage 1 for the Ford Transit Connect 1.6 TDCI EU5 (2004) 95 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno