Ford Tourneo Connect 1.8 TDDI 90 hp — Stage 1 file (+26 hp)
hp
Stage 1 file for Ford Tourneo Connect 1.8 TDDI 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford Tourneo Connect 1.8 TDDI 90 hp ECU
Ford Tourneo Connect (2002) 1.8 TDDI 90 hp — mass-market diesel engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 90 to 116 hp (+26 hp, +29%) and torque from 200 to 260 Nm (+60 Nm). ECU — Ford EECV. Flashing method: OBD or Bench depending on the unit's protection. The 2002 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The F-Series (F-150) is the best-selling pickup in the US. The Mustang has been Ford's iconic muscle car since 1964. ST and RS are Ford's performance sub-brands. Low-output Ford diesels are city units, and Stage 1 is safe. On older Ford TDCi engines, Stage 1 goes in over OBD with no complications. Ford Power Stroke is a diesel range for pickups and SUVs (mainly the US).
Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. Low-output Fords are naturally aspirated city cars, and Stage 1 is safe.
Frequently asked questions
How many horsepower does the Ford Tourneo Connect 1.8 TDDI 90 hp reach after a remap?
The Stage 1 gain for the Ford Tourneo Connect 1.8 TDDI 90 hp is 26 hp (+29%) over the stock 90 hp, for a total of 116 hp. Torque rises from 200 to 260 Nm (+60 Nm).
What is Stage 1 chip tuning for the Ford Tourneo Connect?
Stage 1 is a software optimization of the factory ECU firmware of the Ford Tourneo Connect with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +26 hp with no hardware changes.
Is Stage 1 worth doing on the base Ford Tourneo Connect?
Stage 1 on the base Ford Tourneo Connect is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Ford Tourneo Connect 1.8 TDDI 90 hp?
Stage 2 on the Ford Tourneo Connect 1.8 TDDI 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Ford Tourneo Connect 1.8 TDDI 90 hp use?
The Ford Tourneo Connect 1.8 TDDI 90 hp is fitted with the Ford EECV ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Ford Tourneo Connect remain valid after Stage 1?
After remapping the Ford Tourneo Connect, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Ford Tourneo Connect?
Reading and writing via OBD takes 25-30 minutes on the Ford Tourneo Connect. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Ford Tourneo Connect?
Before Stage 1 the original of the Ford Tourneo Connect 1.8 TDDI 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Ford Tourneo Connect 1.8 TDDI 90 hp cost?
The remap price for the Ford Tourneo Connect 1.8 TDDI 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.