Ford Ranger 3.2 TDCI 200 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Ford Ranger 3.2 TDCI 200 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford Ranger 3.2 TDCI 200 hp ECU
Ford Ranger (2011) 3.2 TDCI 200 hp — mass-market diesel engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 200 to 235 hp (+35 hp, +18%) and torque from 470 to 530 Nm (+60 Nm). This engine ships with different ECU variants: Siemens/Continental SID208, Siemens/Continental SID209, Siemens/Continental SID209 - FRV, Siemens/Continental SID209recovery. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 8 configurations · 4 ECU variants. The 2011 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The F-Series (F-150) is the best-selling pickup in the US. The Mustang has been Ford's iconic muscle car since 1964. ST and RS are Ford's performance sub-brands. Ford Power Stroke is a diesel range for pickups and SUVs (mainly the US). TDCi is Ford's turbo diesel range for Europe. DPF/SCR with AdBlue is standard on Euro-6 Ford diesels.
The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. High-output Ford ST/RS models are the performance segment with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Ford Ranger 3.2 TDCI 200 hp reach after a remap?
The Stage 1 gain for the Ford Ranger 3.2 TDCI 200 hp is 35 hp (+18%) over the stock 200 hp, for a total of 235 hp. Torque rises from 470 to 530 Nm (+60 Nm).
What is Stage 1 chip tuning for the Ford Ranger?
Stage 1 on the Ford Ranger 3.2 TDCI 200 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.
What does Stage 1 give on the powerful Ford Ranger 3.2 TDCI 200 hp?
The high-output Ford Ranger 3.2 TDCI 200 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Ford Ranger 3.2 TDCI 200 hp?
Stage 2 on the Ford Ranger 3.2 TDCI 200 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Ford Ranger 3.2 TDCI 200 hp have?
The Ford Ranger 3.2 TDCI 200 hp has 4 ECU variants: Siemens/Continental SID208, Siemens/Continental SID209, Siemens/Continental SID209 - FRV, Siemens/Continental SID209recovery. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Ford Ranger?
Stage 1 on the Ford Ranger voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Ford Ranger 3.2 TDCI 200 hp done?
The full remap cycle for the Ford Ranger — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Ford Ranger?
The original Ford Ranger ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Ford Ranger 3.2 TDCI 200 hp?
The cost of Stage 1 for the Ford Ranger 3.2 TDCI 200 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.