Ford Mondeo 2.2 TDCI 200 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Ford Mondeo 2.2 TDCI 200 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford Mondeo 2.2 TDCI 200 hp ECU
Ford Mondeo (2015) 2.2 TDCI 200 hp — mass-market diesel engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 200 to 235 hp (+35 hp, +18%) and torque from 420 to 480 Nm (+60 Nm). ECU — Bosch EDC17CP42. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. A diesel built in 2015 — the Tricore ECU era; OBD flash works on most production revisions.
EcoBoost is Ford's own range of turbocharged engines. Ford Motor Company includes Lincoln as its premium sub-brand. Ford pioneered mass assembly-line car production. The Ford Transit is an iconic commercial diesel and a mainstream tuning subject in Europe. High-output Ford Power Stroke diesels power the F-Series pickups. Mid-generation diesel models use standard OBD.
The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. High-output Ford ST/RS models are the performance segment with solid headroom for Stage 1.
Frequently asked questions
How much does the power of the Ford Mondeo 2.2 TDCI 200 hp increase after Stage 1?
Stage 1 for the Ford Mondeo 2.2 TDCI 200 hp adds +35 hp — power increases from 200 to 235 hp (+18%). Torque rises from 420 to 480 Nm (+60 Nm).
What does a Stage 1 remap of the Ford Mondeo 2.2 TDCI 200 hp include?
Stage 1 on the Ford Mondeo 2.2 TDCI 200 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.
What does Stage 1 give on the powerful Ford Mondeo 2.2 TDCI 200 hp?
Stage 1 on the powerful Ford Mondeo 2.2 TDCI 200 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Ford Mondeo 2.2 TDCI 200 hp?
Stage 2 for the Ford Mondeo 2.2 TDCI 200 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Ford Mondeo 2.2 TDCI 200 hp run?
The control unit of the Ford Mondeo 2.2 TDCI 200 hp is the Bosch EDC17CP42. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Ford Mondeo?
Stage 1 on the Ford Mondeo voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Ford Mondeo 2.2 TDCI 200 hp done?
The full remap cycle for the Ford Mondeo — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Ford Mondeo?
The original Ford Mondeo ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Ford Mondeo 2.2 TDCI 200 hp?
The cost of Stage 1 for the Ford Mondeo 2.2 TDCI 200 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.