Ford Mondeo 2.0 TDCI EU6 120 hp — Stage 1 file (+90 hp)
hp
Stage 1 file for Ford Mondeo 2.0 TDCI EU6 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford Mondeo 2.0 TDCI EU6 120 hp ECU
Ford Mondeo (2015) 2.0 TDCI EU6 120 hp — mass-market diesel engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 120 to 210 hp (+90 hp, +75%) and torque from 310 to 440 Nm (+130 Nm). ECU — Delphi DCM6.1. Flashing method: OBD or Bench depending on the unit's protection. The 2015 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The F-Series (F-150) is the best-selling pickup in the US. The Mustang has been Ford's iconic muscle car since 1964. ST and RS are Ford's performance sub-brands. Ford Power Stroke is a diesel range for pickups and SUVs (mainly the US).
Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. Mid-range Ford models with EcoBoost are a mainstream chip tuning subject. The Ford Transit and Ranger are Ford's best-selling commercial diesels in Europe.
Frequently asked questions
How many horsepower does the Ford Mondeo 2.0 TDCI EU6 120 hp reach after a remap?
The Stage 1 gain for the Ford Mondeo 2.0 TDCI EU6 120 hp is 90 hp (+75%) over the stock 120 hp, for a total of 210 hp. Torque rises from 310 to 440 Nm (+130 Nm).
What is Stage 1 chip tuning for the Ford Mondeo?
Stage 1 is a software optimization of the factory ECU firmware of the Ford Mondeo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +90 hp with no hardware changes.
What is the risk of Stage 1 on the Ford Mondeo 2.0 TDCI EU6 120 hp?
A remap of the Ford Mondeo 2.0 TDCI EU6 120 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Ford Mondeo 2.0 TDCI EU6 120 hp?
Stage 2 on the Ford Mondeo 2.0 TDCI EU6 120 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Ford Mondeo 2.0 TDCI EU6 120 hp use?
The Ford Mondeo 2.0 TDCI EU6 120 hp is fitted with the Delphi DCM6.1 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Ford Mondeo remain valid after Stage 1?
After remapping the Ford Mondeo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Ford Mondeo?
Reading and writing via OBD takes 25-30 minutes on the Ford Mondeo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Ford Mondeo?
Before Stage 1 the original of the Ford Mondeo 2.0 TDCI EU6 120 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Ford Mondeo 2.0 TDCI EU6 120 hp cost?
The remap price for the Ford Mondeo 2.0 TDCI EU6 120 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.