Ford Mondeo 2.0 T EcoBoost 240 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Ford Mondeo 2.0 T EcoBoost 240 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford Mondeo 2.0 T EcoBoost 240 hp ECU
Ford Mondeo (2010) 2.0 T EcoBoost 240 hp — mass-market petrol engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 240 to 265 hp (+25 hp, +10%) and torque from 340 to 420 Nm (+80 Nm). This engine ships with different ECU variants: Bosch MED17.0, Bosch MED17.0.1, Bosch MEDG17.0. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 6 configurations · 3 ECU variants. The 2010 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Ford is an American carmaker, founded in 1903 by Henry Ford. Ford shares some ECUs with Mazda (a Visteon legacy). The F-Series (F-150) is the best-selling pickup in the US. EcoBoost is Ford's proprietary turbo petrol engine range. Ford ST/RS models deliver a solid gain with Stage 1. Ford ST and RS are performance sub-brands (Focus ST/RS, Fiesta ST, Mustang Mach 1).
Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. High-output Ford ST/RS models are the performance segment with solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Ford Mondeo 2.0 T EcoBoost 240 hp?
After Stage 1 the power of the Ford Mondeo 2.0 T EcoBoost 240 hp rises from 240 to 265 hp, a gain of 25 hp (+10%). Torque rises from 340 to 420 Nm (+80 Nm).
How does Stage 1 differ from stock on the Ford Mondeo?
Stage 1 is a software optimization of the factory ECU firmware of the Ford Mondeo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Ford Mondeo?
The high-output Ford Mondeo 2.0 T EcoBoost 240 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Ford Mondeo 2.0 T EcoBoost 240 hp?
Stage 2 on the Ford Mondeo 2.0 T EcoBoost 240 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Ford Mondeo 2.0 T EcoBoost 240 hp built with?
The Ford Mondeo 2.0 T EcoBoost 240 hp comes with 3 ECU variants: Bosch MED17.0, Bosch MED17.0.1, Bosch MEDG17.0. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Ford Mondeo remain valid after Stage 1?
After remapping the Ford Mondeo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Ford Mondeo?
Reading and writing via OBD takes 25-30 minutes on the Ford Mondeo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Ford Mondeo?
Before Stage 1 the original of the Ford Mondeo 2.0 T EcoBoost 240 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Ford Mondeo 2.0 T EcoBoost 240 hp cost?
The remap price for the Ford Mondeo 2.0 T EcoBoost 240 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.