Ford Galaxy 2.0 T EcoBoost 240 hp — Stage 1 file (+25 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Ford Galaxy 2.0 T EcoBoost 240 hp ECU

Ford Galaxy (2015) 2.0 T EcoBoost 240 hp — mass-market petrol engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 240 to 265 hp (+25 hp, +10%) and torque from 340 to 420 Nm (+80 Nm). This engine ships with different ECU variants: Bosch MED17.0, Bosch MED17.0.1, Bosch MEDG17.0. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A petrol engine built in 2015 — a Tricore platform without strong protection; OBD access works.

The Mustang has been Ford's iconic muscle car since 1964. ST and RS are Ford's performance sub-brands. EcoBoost is Ford's own range of turbocharged engines. The Coyote V8 is the flagship engine of the Ford Mustang GT. EcoBoost is Ford's proprietary turbo petrol engine range. Ford ST/RS models deliver a solid gain with Stage 1.

The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. High-output Ford ST/RS models are the performance segment with solid headroom for Stage 1.

Frequently asked questions

How much horsepower does Stage 1 add for the Ford Galaxy 2.0 T EcoBoost 240 hp?

Stage 1 chip tuning on the Ford Galaxy 2.0 T EcoBoost 240 hp boosts engine output by 25 hp: from 240 to 265 hp. Torque rises from 340 to 420 Nm (+80 Nm).

What changes in the Ford Galaxy ECU after Stage 1?

Stage 1 on the Ford Galaxy 2.0 T EcoBoost 240 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.

What does Stage 1 give on the powerful Ford Galaxy 2.0 T EcoBoost 240 hp?

Stage 1 on the powerful Ford Galaxy 2.0 T EcoBoost 240 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).

How does Stage 2 differ from Stage 1 on the Ford Galaxy 2.0 T EcoBoost 240 hp?

Stage 2 for the Ford Galaxy 2.0 T EcoBoost 240 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.

How many ECU variants does the Ford Galaxy 2.0 T EcoBoost 240 hp have?

The Ford Galaxy 2.0 T EcoBoost 240 hp has 3 ECU variants: Bosch MED17.0, Bosch MED17.0.1, Bosch MEDG17.0. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.

Does Stage 1 void the warranty on the Ford Galaxy?

Stage 1 on the Ford Galaxy voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Ford Galaxy 2.0 T EcoBoost 240 hp done?

The full remap cycle for the Ford Galaxy — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Ford Galaxy?

The original Ford Galaxy ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Ford Galaxy 2.0 T EcoBoost 240 hp?

The cost of Stage 1 for the Ford Galaxy 2.0 T EcoBoost 240 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno