Ford Fusion 1.4 TDCI 68 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Ford Fusion 1.4 TDCI 68 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford Fusion 1.4 TDCI 68 hp ECU
Ford Fusion (2006) 1.4 TDCI 68 hp — mass-market diesel engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 68 to 93 hp (+25 hp, +37%) and torque from 160 to 210 Nm (+50 Nm). ECU — Siemens/Continental SID802. Flashing method: OBD or Bench depending on the unit's protection. The 2006 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The F-Series (F-150) is the best-selling pickup in the US. The Mustang has been Ford's iconic muscle car since 1964. ST and RS are Ford's performance sub-brands. Low-output Ford diesels are city units, and Stage 1 is safe. On older Ford TDCi engines, Stage 1 goes in over OBD with no complications. Ford Power Stroke is a diesel range for pickups and SUVs (mainly the US).
Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. Low-output Fords are naturally aspirated city cars, and Stage 1 is safe.
Frequently asked questions
How much does the power of the Ford Fusion 1.4 TDCI 68 hp increase after Stage 1?
The Stage 1 gain for the Ford Fusion 1.4 TDCI 68 hp is 25 hp (+37%) over the stock 68 hp, for a total of 93 hp. Torque rises from 160 to 210 Nm (+50 Nm).
What is Stage 1 chip tuning for the Ford Fusion?
Stage 1 is a software optimization of the factory ECU firmware of the Ford Fusion with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Is Stage 1 worth doing on the base Ford Fusion?
Stage 1 on the base Ford Fusion is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Ford Fusion 1.4 TDCI 68 hp?
Stage 2 on the Ford Fusion 1.4 TDCI 68 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Ford Fusion 1.4 TDCI 68 hp use?
The Ford Fusion 1.4 TDCI 68 hp is fitted with the Siemens/Continental SID802 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Ford Fusion remain valid after Stage 1?
After remapping the Ford Fusion, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Ford Fusion?
Reading and writing via OBD takes 25-30 minutes on the Ford Fusion. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Ford Fusion?
Before Stage 1 the original of the Ford Fusion 1.4 TDCI 68 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Ford Fusion 1.4 TDCI 68 hp cost?
The remap price for the Ford Fusion 1.4 TDCI 68 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.