Ford Focus 2.5 T Duratec 350 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Ford Focus 2.5 T Duratec 350 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford Focus 2.5 T Duratec 350 hp ECU
Ford Focus (2004) 2.5 T Duratec 350 hp — mass-market petrol engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 350 to 370 hp (+20 hp, +6%) and torque from 460 to 540 Nm (+80 Nm). A petrol engine built in 2004 — the era before widespread firmware encryption, OBD flash without complications.
The Mustang has been Ford's iconic muscle car since 1964. ST and RS are Ford's performance sub-brands. EcoBoost is Ford's own range of turbocharged engines. The Mustang Coyote V8 / Mustang Shelby offer significant potential with hardware. EcoBoost is Ford's proprietary turbo petrol engine range. Ford ST and RS are performance sub-brands (Focus ST/RS, Fiesta ST, Mustang Mach 1).
The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. The Mustang Coyote confidently reaches Stage 2 with hardware. Cobb / SCT are the leading tuning brands for top Ford models in the US. Top Ford Mustang Coyote / Shelby / GT engines sit at the power ceiling of the American performance segment.
Frequently asked questions
How many horsepower does the Ford Focus 2.5 T Duratec 350 hp reach after a remap?
Stage 1 chip tuning on the Ford Focus 2.5 T Duratec 350 hp boosts engine output by 20 hp: from 350 to 370 hp. Torque rises from 460 to 540 Nm (+80 Nm).
What changes in the Ford Focus ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Ford Focus with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Does Stage 1 make sense on the Ford Focus 2.5 T Duratec 350 hp with this much power?
On the top-spec Ford Focus 2.5 T Duratec 350 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Ford Focus 2.5 T Duratec 350 hp?
Stage 2 for the Ford Focus 2.5 T Duratec 350 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Ford Focus remain valid after Stage 1?
After remapping the Ford Focus, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Ford Focus?
Reading and writing via OBD takes 25-30 minutes on the Ford Focus. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Ford Focus?
Before Stage 1 the original of the Ford Focus 2.5 T Duratec 350 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Ford Focus 2.5 T Duratec 350 hp cost?
The remap price for the Ford Focus 2.5 T Duratec 350 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.