Ford Focus 2.5 T 350 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Ford Focus 2.5 T 350 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford Focus 2.5 T 350 hp ECU
Ford Focus (2004) 2.5 T 350 hp — mass-market petrol engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 350 to 370 hp (+20 hp, +6%) and torque from 460 to 540 Nm (+80 Nm). ECU — Bosch ME9.0C. Flashing method: OBD or Bench depending on the unit's protection. The 2004 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
ST and RS are Ford's performance sub-brands. EcoBoost is Ford's own range of turbocharged engines. Ford Motor Company includes Lincoln as its premium sub-brand. The Mustang Coyote V8 / Mustang Shelby offer significant potential with hardware. EcoBoost is Ford's proprietary turbo petrol engine range. Ford ST and RS are performance sub-brands (Focus ST/RS, Fiesta ST, Mustang Mach 1).
The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. The Mustang Coyote confidently reaches Stage 2 with hardware. Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. Top Ford Mustang Coyote / Shelby / GT engines sit at the power ceiling of the American performance segment. Cobb / SCT are the leading tuning brands for top Ford models in the US.
Frequently asked questions
How many horsepower does the Ford Focus 2.5 T 350 hp reach after a remap?
After Stage 1 the power of the Ford Focus 2.5 T 350 hp rises from 350 to 370 hp, a gain of 20 hp (+6%). Torque rises from 460 to 540 Nm (+80 Nm).
How does Stage 1 differ from stock on the Ford Focus?
Stage 1 is a software optimization of the factory ECU firmware of the Ford Focus with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Does Stage 1 make sense on the Ford Focus 2.5 T 350 hp with this much power?
Stage 1 for the Ford Focus 2.5 T 350 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Ford Focus 2.5 T 350 hp?
Stage 2 on the Ford Focus 2.5 T 350 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Ford Focus 2.5 T 350 hp use?
The Ford Focus 2.5 T 350 hp is fitted with the Bosch ME9.0C ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Ford Focus remain valid after Stage 1?
After remapping the Ford Focus, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Ford Focus?
Reading and writing via OBD takes 25-30 minutes on the Ford Focus. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Ford Focus?
Before Stage 1 the original of the Ford Focus 2.5 T 350 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Ford Focus 2.5 T 350 hp cost?
The remap price for the Ford Focus 2.5 T 350 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.