Ford Focus 1.6 TDCI 90 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Ford Focus 1.6 TDCI 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford Focus 1.6 TDCI 90 hp ECU
Ford Focus (2004) 1.6 TDCI 90 hp — mass-market diesel engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 90 to 115 hp (+25 hp, +28%) and torque from 215 to 260 Nm (+45 Nm). This engine ships with different ECU variants: Bosch EDC16C3, Bosch EDC16C34. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2004 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
ST and RS are Ford's performance sub-brands. EcoBoost is Ford's own range of turbocharged engines. Ford Motor Company includes Lincoln as its premium sub-brand. Low-output Ford diesels are city units, and Stage 1 is safe. On older Ford TDCi engines, Stage 1 goes in over OBD with no complications. Ford Power Stroke is a diesel range for pickups and SUVs (mainly the US).
Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. Low-output Fords are naturally aspirated city cars, and Stage 1 is safe.
Frequently asked questions
How much does the power of the Ford Focus 1.6 TDCI 90 hp increase after Stage 1?
After Stage 1 the power of the Ford Focus 1.6 TDCI 90 hp rises from 90 to 115 hp, a gain of 25 hp (+28%). Torque rises from 215 to 260 Nm (+45 Nm).
How does Stage 1 differ from stock on the Ford Focus?
Stage 1 is a software optimization of the factory ECU firmware of the Ford Focus with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Is Stage 1 worth doing on the base Ford Focus?
Stage 1 on the base Ford Focus is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Ford Focus 1.6 TDCI 90 hp?
Stage 2 on the Ford Focus 1.6 TDCI 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Ford Focus 1.6 TDCI 90 hp built with?
The Ford Focus 1.6 TDCI 90 hp comes with 2 ECU variants: Bosch EDC16C3, Bosch EDC16C34. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Ford Focus remain valid after Stage 1?
After remapping the Ford Focus, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Ford Focus?
Reading and writing via OBD takes 25-30 minutes on the Ford Focus. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Ford Focus?
Before Stage 1 the original of the Ford Focus 1.6 TDCI 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Ford Focus 1.6 TDCI 90 hp cost?
The remap price for the Ford Focus 1.6 TDCI 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.