Ford Fiesta 1.5 TDCI EU5 75 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Ford Fiesta 1.5 TDCI EU5 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford Fiesta 1.5 TDCI EU5 75 hp ECU
Ford Fiesta (2013) 1.5 TDCI EU5 75 hp — mass-market diesel engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 75 to 95 hp (+20 hp, +27%) and torque from 185 to 230 Nm (+45 Nm). ECU — Bosch EDC17C10. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2013 — the Tricore ECU era; OBD flash works on most production revisions.
Ford pioneered mass assembly-line car production. Ford is an American carmaker, founded in 1903 by Henry Ford. Ford shares some ECUs with Mazda (a Visteon legacy). TDCi is Ford's turbo diesel range for Europe. DPF/SCR with AdBlue is standard on Euro-6 Ford diesels. The Ford Transit is an iconic commercial diesel and a mainstream tuning subject in Europe.
Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. Low-output Fords are naturally aspirated city cars, and Stage 1 is safe.
Frequently asked questions
How much does the power of the Ford Fiesta 1.5 TDCI EU5 75 hp increase after Stage 1?
Stage 1 chip tuning on the Ford Fiesta 1.5 TDCI EU5 75 hp boosts engine output by 20 hp: from 75 to 95 hp. Torque rises from 185 to 230 Nm (+45 Nm).
What changes in the Ford Fiesta ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Ford Fiesta with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Is Stage 1 worth doing on the base Ford Fiesta?
Yes, Stage 1 on the low-output Ford Fiesta 1.5 TDCI EU5 75 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Ford Fiesta 1.5 TDCI EU5 75 hp?
Stage 2 for the Ford Fiesta 1.5 TDCI EU5 75 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Ford Fiesta 1.5 TDCI EU5 75 hp use?
The Ford Fiesta 1.5 TDCI EU5 75 hp is fitted with the Bosch EDC17C10 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Ford Fiesta remain valid after Stage 1?
After remapping the Ford Fiesta, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Ford Fiesta?
Reading and writing via OBD takes 25-30 minutes on the Ford Fiesta. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Ford Fiesta?
Before Stage 1 the original of the Ford Fiesta 1.5 TDCI EU5 75 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Ford Fiesta 1.5 TDCI EU5 75 hp cost?
The remap price for the Ford Fiesta 1.5 TDCI EU5 75 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.