Ford Fiesta 1.0i (2013) 80 hp — Stage 1 file (+5 hp)
hp
Stage 1 file for Ford Fiesta 1.0i (2013) 80 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford Fiesta 1.0i (2013) 80 hp ECU
Ford Fiesta (2013) 1.0i (2013) 80 hp — mass-market petrol engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 80 to 85 hp (+5 hp, +6%) and torque from 105 to 115 Nm (+10 Nm). ECU — Bosch MED17.0.1. Flashing method: OBD or Bench depending on the unit's protection. The 2013 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
ST and RS are Ford's performance sub-brands. EcoBoost is Ford's own range of turbocharged engines. Ford Motor Company includes Lincoln as its premium sub-brand. EcoBoost is Ford's proprietary turbo petrol engine range. Low-output Ford petrol engines are naturally aspirated city units. Ford ST and RS are performance sub-brands (Focus ST/RS, Fiesta ST, Mustang Mach 1).
The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. Low-output Fords are naturally aspirated city cars, and Stage 1 is safe.
Frequently asked questions
How many horsepower does the Ford Fiesta 1.0i (2013) 80 hp reach after a remap?
After Stage 1 the power of the Ford Fiesta 1.0i (2013) 80 hp rises from 80 to 85 hp, a gain of 5 hp (+6%). Torque rises from 105 to 115 Nm (+10 Nm).
How does Stage 1 differ from stock on the Ford Fiesta?
Stage 1 on the Ford Fiesta 1.0i (2013) 80 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +5 hp with no hardware changes.
Is Stage 1 safe for the low-output Ford Fiesta 1.0i (2013) 80 hp?
Stage 1 on the base Ford Fiesta is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the Ford Fiesta 1.0i (2013) 80 hp?
Stage 2 on the Ford Fiesta 1.0i (2013) 80 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Ford Fiesta 1.0i (2013) 80 hp run?
The control unit of the Ford Fiesta 1.0i (2013) 80 hp is the Bosch MED17.0.1. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Ford Fiesta?
Stage 1 on the Ford Fiesta voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Ford Fiesta 1.0i (2013) 80 hp done?
The full remap cycle for the Ford Fiesta — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Ford Fiesta?
The original Ford Fiesta ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Ford Fiesta 1.0i (2013) 80 hp?
The cost of Stage 1 for the Ford Fiesta 1.0i (2013) 80 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.