Ford Bronco 2.7L Ecoboost V6 330 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Ford Bronco 2.7L Ecoboost V6 330 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford Bronco 2.7L Ecoboost V6 330 hp ECU
Ford Bronco (2020) 2.7L Ecoboost V6 330 hp — mass-market petrol engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 330 to 360 hp (+30 hp, +9%) and torque from 562 to 610 Nm (+48 Nm). ECU — Bosch MG1CS036. Flashing method: OBD or Bench depending on the unit's protection. A 2020 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Ford pioneered mass assembly-line car production. Ford is an American carmaker, founded in 1903 by Henry Ford. Ford shares some ECUs with Mazda (a Visteon legacy). The Coyote V8 is the flagship engine of the Ford Mustang GT. EcoBoost is Ford's proprietary turbo petrol engine range. Ford ST/RS models deliver a solid gain with Stage 1.
The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. High-output Ford ST/RS models are the performance segment with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Ford Bronco 2.7L Ecoboost V6 330 hp reach after a remap?
Stage 1 chip tuning on the Ford Bronco 2.7L Ecoboost V6 330 hp boosts engine output by 30 hp: from 330 to 360 hp. Torque rises from 562 to 610 Nm (+48 Nm).
What changes in the Ford Bronco ECU after Stage 1?
Stage 1 on the Ford Bronco 2.7L Ecoboost V6 330 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
What does Stage 1 give on the powerful Ford Bronco 2.7L Ecoboost V6 330 hp?
Stage 1 on the powerful Ford Bronco 2.7L Ecoboost V6 330 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Ford Bronco 2.7L Ecoboost V6 330 hp?
Stage 2 for the Ford Bronco 2.7L Ecoboost V6 330 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Ford Bronco 2.7L Ecoboost V6 330 hp run?
The control unit of the Ford Bronco 2.7L Ecoboost V6 330 hp is the Bosch MG1CS036. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Ford Bronco?
Stage 1 on the Ford Bronco voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Ford Bronco 2.7L Ecoboost V6 330 hp done?
The full remap cycle for the Ford Bronco — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Ford Bronco?
The original Ford Bronco ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Ford Bronco 2.7L Ecoboost V6 330 hp?
The cost of Stage 1 for the Ford Bronco 2.7L Ecoboost V6 330 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.