Ford B-Max 1.0 T EcoBoost 125 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Ford B-Max 1.0 T EcoBoost 125 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford B-Max 1.0 T EcoBoost 125 hp ECU
Ford B-Max (2011) 1.0 T EcoBoost 125 hp — mass-market petrol engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 125 to 145 hp (+20 hp, +16%) and torque from 170 to 250 Nm (+80 Nm). This engine ships with different ECU variants: Bosch MED17.0.1, Bosch MED17.0.7, Bosch MEDG17.0, Bosch MG1CS016, Bosch MG1CS017. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 5 configurations · 5 ECU variants. A petrol engine built in 2011 — a Tricore platform without strong protection; OBD access works.
Ford shares some ECUs with Mazda (a Visteon legacy). The F-Series (F-150) is the best-selling pickup in the US. The Mustang has been Ford's iconic muscle car since 1964. Mid-range EcoBoost engines are a mainstream Stage 1 subject. Ford ST and RS are performance sub-brands (Focus ST/RS, Fiesta ST, Mustang Mach 1). The Coyote V8 is the flagship engine of the Ford Mustang GT.
Stage 1 on EcoBoost delivers a noticeable gain. Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. The EcoBoost 2.0/2.3 (Focus ST, Mustang EcoBoost) is a popular tuning subject. The Ford Transit and Ranger are Ford's best-selling commercial diesels in Europe. Mid-range Ford models with EcoBoost are a mainstream chip tuning subject.
Frequently asked questions
How much horsepower does Stage 1 add for the Ford B-Max 1.0 T EcoBoost 125 hp?
Stage 1 for the Ford B-Max 1.0 T EcoBoost 125 hp adds +20 hp — power increases from 125 to 145 hp (+16%). Torque rises from 170 to 250 Nm (+80 Nm).
What does a Stage 1 remap of the Ford B-Max 1.0 T EcoBoost 125 hp include?
Stage 1 on the Ford B-Max 1.0 T EcoBoost 125 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.0 T EcoBoost 125 hp?
Stage 1 on the Ford B-Max 1.0 T EcoBoost 125 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Ford B-Max 1.0 T EcoBoost 125 hp?
Stage 2 for the Ford B-Max 1.0 T EcoBoost 125 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Ford B-Max 1.0 T EcoBoost 125 hp have?
The Ford B-Max 1.0 T EcoBoost 125 hp has 5 ECU variants: Bosch MED17.0.1, Bosch MED17.0.7, Bosch MEDG17.0, Bosch MG1CS016, Bosch MG1CS017. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Ford B-Max?
Stage 1 on the Ford B-Max voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Ford B-Max 1.0 T EcoBoost 125 hp done?
The full remap cycle for the Ford B-Max — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Ford B-Max?
The original Ford B-Max ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Ford B-Max 1.0 T EcoBoost 125 hp?
The cost of Stage 1 for the Ford B-Max 1.0 T EcoBoost 125 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.