Fiat Topolino 5.5 kWh 8 hp — Stage 1 file (+1 hp)
hp
Stage 1 file for Fiat Topolino 5.5 kWh 8 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Topolino 5.5 kWh 8 hp ECU
Fiat Topolino (2023) 5.5 kWh 8 hp — mass-market petrol engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 8 to 9 hp (+1 hp, +12%) and torque from 40 to 45 Nm (+5 Nm). A 2023 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Fiat sits alongside brands such as Abarth, Lancia and Alfa Romeo (via Stellantis). Fiat's petrol range consists of compact turbo and naturally aspirated engines for the urban segment. MultiAir is Fiat's intake-valve control system. Low-output Fiat petrol engines are naturally aspirated city-segment units; the gain is modest.
Protection on modern Fiat models uses Tricore TPROT, so Bench is required. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. On naturally aspirated Fiat engines the main effect is sharper throttle response. Low-output Fiat engines are city units, and Stage 1 is safe on them.
Frequently asked questions
How much horsepower does Stage 1 add for the Fiat Topolino 5.5 kWh 8 hp?
Stage 1 for the Fiat Topolino 5.5 kWh 8 hp adds +1 hp — power increases from 8 to 9 hp (+12%). Torque rises from 40 to 45 Nm (+5 Nm).
What does a Stage 1 remap of the Fiat Topolino 5.5 kWh 8 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Topolino with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +1 hp with no hardware changes.
Is Stage 1 worth doing on the base Fiat Topolino?
Yes, Stage 1 on the low-output Fiat Topolino 5.5 kWh 8 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Fiat Topolino 5.5 kWh 8 hp?
Stage 2 for the Fiat Topolino 5.5 kWh 8 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Fiat Topolino remain valid after Stage 1?
After remapping the Fiat Topolino, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Topolino?
Reading and writing via OBD takes 25-30 minutes on the Fiat Topolino. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Topolino?
Before Stage 1 the original of the Fiat Topolino 5.5 kWh 8 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Topolino 5.5 kWh 8 hp cost?
The remap price for the Fiat Topolino 5.5 kWh 8 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.