Fiat Talento 1.6 JTDm (talento) 120 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Fiat Talento 1.6 JTDm (talento) 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Talento 1.6 JTDm (talento) 120 hp ECU
Fiat Talento (2016) 1.6 JTDm (talento) 120 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 120 to 150 hp (+30 hp, +25%) and torque from 300 to 380 Nm (+80 Nm). ECU — Bosch EDC17C84. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2016 — the Tricore ECU era; OBD flash works on most production revisions.
Fiat sits alongside brands such as Abarth, Lancia and Alfa Romeo (via Stellantis). Fiat's diesel range is built mainly around MultiJet (Common Rail) technology.
On Fiat diesels, Stage 1 delivers a noticeable torque gain. On pre-2017 Fiat models, Stage 1 is done via OBD without bench. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. The Fiat community in Southern Europe has a large pool of ready-made Stage files. Mid-range Fiat engines are a high-volume chip tuning subject.
Frequently asked questions
How much does the power of the Fiat Talento 1.6 JTDm (talento) 120 hp increase after Stage 1?
Stage 1 for the Fiat Talento 1.6 JTDm (talento) 120 hp adds +30 hp — power increases from 120 to 150 hp (+25%). Torque rises from 300 to 380 Nm (+80 Nm).
What does a Stage 1 remap of the Fiat Talento 1.6 JTDm (talento) 120 hp include?
Stage 1 on the Fiat Talento 1.6 JTDm (talento) 120 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 JTDm (talento) 120 hp?
Stage 1 on the Fiat Talento 1.6 JTDm (talento) 120 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Fiat Talento 1.6 JTDm (talento) 120 hp?
Stage 2 for the Fiat Talento 1.6 JTDm (talento) 120 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Fiat Talento 1.6 JTDm (talento) 120 hp run?
The control unit of the Fiat Talento 1.6 JTDm (talento) 120 hp is the Bosch EDC17C84. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Fiat Talento?
Stage 1 on the Fiat Talento voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Fiat Talento 1.6 JTDm (talento) 120 hp done?
The full remap cycle for the Fiat Talento — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Fiat Talento?
The original Fiat Talento ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Fiat Talento 1.6 JTDm (talento) 120 hp?
The cost of Stage 1 for the Fiat Talento 1.6 JTDm (talento) 120 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.