Fiat Talento 1.6 JTDm Bi-Turbo 145 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Fiat Talento 1.6 JTDm Bi-Turbo 145 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Talento 1.6 JTDm Bi-Turbo 145 hp ECU
Fiat Talento (2016) 1.6 JTDm Bi-Turbo 145 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 145 to 170 hp (+25 hp, +17%) and torque from 340 to 390 Nm (+50 Nm). ECU — Bosch EDC17C84. Flashing method: OBD or Bench depending on the unit's protection. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Fiat is an Italian carmaker from Turin, founded in 1899. DPF/SCR with AdBlue is standard on all Euro-6 Fiat diesels.
On pre-2017 Fiat models, Stage 1 is done via OBD without bench. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Mid-range Fiat engines are a high-volume chip tuning subject. The Fiat community in Southern Europe has a large pool of ready-made Stage files.
Frequently asked questions
How much horsepower does Stage 1 add for the Fiat Talento 1.6 JTDm Bi-Turbo 145 hp?
The Stage 1 gain for the Fiat Talento 1.6 JTDm Bi-Turbo 145 hp is 25 hp (+17%) over the stock 145 hp, for a total of 170 hp. Torque rises from 340 to 390 Nm (+50 Nm).
What is Stage 1 chip tuning for the Fiat Talento?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Talento with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
What is the risk of Stage 1 on the Fiat Talento 1.6 JTDm Bi-Turbo 145 hp?
A remap of the Fiat Talento 1.6 JTDm Bi-Turbo 145 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Fiat Talento 1.6 JTDm Bi-Turbo 145 hp?
Stage 2 on the Fiat Talento 1.6 JTDm Bi-Turbo 145 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Fiat Talento 1.6 JTDm Bi-Turbo 145 hp use?
The Fiat Talento 1.6 JTDm Bi-Turbo 145 hp is fitted with the Bosch EDC17C84 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Fiat Talento remain valid after Stage 1?
After remapping the Fiat Talento, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Talento?
Reading and writing via OBD takes 25-30 minutes on the Fiat Talento. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Talento?
Before Stage 1 the original of the Fiat Talento 1.6 JTDm Bi-Turbo 145 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Talento 1.6 JTDm Bi-Turbo 145 hp cost?
The remap price for the Fiat Talento 1.6 JTDm Bi-Turbo 145 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.