Fiat Talento 1.6 JTDm Bi-Turbo 120 hp — Stage 1 file (+45 hp)
hp
Stage 1 file for Fiat Talento 1.6 JTDm Bi-Turbo 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Talento 1.6 JTDm Bi-Turbo 120 hp ECU
Fiat Talento (2016) 1.6 JTDm Bi-Turbo 120 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 120 to 165 hp (+45 hp, +38%) and torque from 320 to 390 Nm (+70 Nm). ECU — Bosch EDC17C84. Flashing method: OBD or Bench depending on the unit's protection. The 2016 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Fiat is an Italian carmaker from Turin, founded in 1899. DPF/SCR with AdBlue is standard on all Euro-6 Fiat diesels.
The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. On Fiat diesels, Stage 1 delivers a noticeable torque gain. On pre-2017 Fiat models, Stage 1 is done via OBD without bench. Mid-range Fiat engines are a high-volume chip tuning subject. The Fiat community in Southern Europe has a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the Fiat Talento 1.6 JTDm Bi-Turbo 120 hp?
After Stage 1 the power of the Fiat Talento 1.6 JTDm Bi-Turbo 120 hp rises from 120 to 165 hp, a gain of 45 hp (+38%). Torque rises from 320 to 390 Nm (+70 Nm).
How does Stage 1 differ from stock on the Fiat Talento?
Stage 1 on the Fiat Talento 1.6 JTDm Bi-Turbo 120 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +45 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 JTDm Bi-Turbo 120 hp?
Stage 1 on the Fiat Talento 1.6 JTDm Bi-Turbo 120 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Fiat Talento 1.6 JTDm Bi-Turbo 120 hp?
Stage 2 on the Fiat Talento 1.6 JTDm Bi-Turbo 120 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Fiat Talento 1.6 JTDm Bi-Turbo 120 hp run?
The control unit of the Fiat Talento 1.6 JTDm Bi-Turbo 120 hp is the Bosch EDC17C84. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Fiat Talento?
Stage 1 on the Fiat Talento voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Fiat Talento 1.6 JTDm Bi-Turbo 120 hp done?
The full remap cycle for the Fiat Talento — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Fiat Talento?
The original Fiat Talento ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Fiat Talento 1.6 JTDm Bi-Turbo 120 hp?
The cost of Stage 1 for the Fiat Talento 1.6 JTDm Bi-Turbo 120 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.