Fiat Strada 1.3i flexfuel 101 hp — Stage 1 file (+11 hp)
hp
Stage 1 file for Fiat Strada 1.3i flexfuel 101 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Strada 1.3i flexfuel 101 hp ECU
Fiat Strada (2020) 1.3i flexfuel 101 hp — mass-market petrol engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 101 to 112 hp (+11 hp, +11%) and torque from 140 to 160 Nm (+20 Nm). ECU — Marelli 10GF. Flashing method: OBD or Bench depending on the unit's protection. A modern petrol engine built in 2020 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Fiat is one of the founders of Stellantis, formed by the merger of FCA and PSA in 2021. Fiat's petrol range consists of compact turbo and naturally aspirated engines for the urban segment. MultiAir is Fiat's intake-valve control system. On mid-range Fiat turbo petrol engines, Stage 1 delivers a noticeable gain.
The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. On mid-range Fiat petrol engines, Stage 1 delivers a noticeable gain. Protection on modern Fiat models uses Tricore TPROT, so Bench is required. Mid-range Fiat engines are a high-volume chip tuning subject. The Fiat community in Southern Europe has a large pool of ready-made Stage files.
Frequently asked questions
How much horsepower does Stage 1 add for the Fiat Strada 1.3i flexfuel 101 hp?
After Stage 1 the power of the Fiat Strada 1.3i flexfuel 101 hp rises from 101 to 112 hp, a gain of 11 hp (+11%). Torque rises from 140 to 160 Nm (+20 Nm).
How does Stage 1 differ from stock on the Fiat Strada?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Strada with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +11 hp with no hardware changes.
What is the risk of Stage 1 on the Fiat Strada 1.3i flexfuel 101 hp?
A remap of the Fiat Strada 1.3i flexfuel 101 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Fiat Strada 1.3i flexfuel 101 hp?
Stage 2 on the Fiat Strada 1.3i flexfuel 101 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Fiat Strada 1.3i flexfuel 101 hp use?
The Fiat Strada 1.3i flexfuel 101 hp is fitted with the Marelli 10GF ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Fiat Strada remain valid after Stage 1?
After remapping the Fiat Strada, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Strada?
Reading and writing via OBD takes 25-30 minutes on the Fiat Strada. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Strada?
Before Stage 1 the original of the Fiat Strada 1.3i flexfuel 101 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Strada 1.3i flexfuel 101 hp cost?
The remap price for the Fiat Strada 1.3i flexfuel 101 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.