Fiat Stilo 1.9 JTD 100 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Fiat Stilo 1.9 JTD 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Stilo 1.9 JTD 100 hp ECU
Fiat Stilo (2001) 1.9 JTD 100 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 100 to 135 hp (+35 hp, +35%) and torque from 200 to 265 Nm (+65 Nm). ECU — Bosch EDC15C7. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 2001 — the era of classic Common Rail without strong encryption.
Fiat is an Italian carmaker from Turin, founded in 1899. DPF/SCR with AdBlue is standard on all Euro-6 Fiat diesels.
On Fiat diesels, Stage 1 delivers a noticeable torque gain. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. The Fiat community in Southern Europe has a large pool of ready-made Stage files. Mid-range Fiat engines are a high-volume chip tuning subject.
Frequently asked questions
How much does the power of the Fiat Stilo 1.9 JTD 100 hp increase after Stage 1?
Stage 1 chip tuning on the Fiat Stilo 1.9 JTD 100 hp boosts engine output by 35 hp: from 100 to 135 hp. Torque rises from 200 to 265 Nm (+65 Nm).
What changes in the Fiat Stilo ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Stilo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Fiat Stilo 1.9 JTD 100 hp?
A remap of the Fiat Stilo 1.9 JTD 100 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Fiat Stilo 1.9 JTD 100 hp?
Stage 2 for the Fiat Stilo 1.9 JTD 100 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Fiat Stilo 1.9 JTD 100 hp use?
The Fiat Stilo 1.9 JTD 100 hp is fitted with the Bosch EDC15C7 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Fiat Stilo remain valid after Stage 1?
After remapping the Fiat Stilo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Stilo?
Reading and writing via OBD takes 25-30 minutes on the Fiat Stilo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Stilo?
Before Stage 1 the original of the Fiat Stilo 1.9 JTD 100 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Stilo 1.9 JTD 100 hp cost?
The remap price for the Fiat Stilo 1.9 JTD 100 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.