Fiat Scudo 2.0 JTDm 163 hp — Stage 1 file (+27 hp)
hp
Stage 1 file for Fiat Scudo 2.0 JTDm 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Scudo 2.0 JTDm 163 hp ECU
Fiat Scudo (2008) 2.0 JTDm 163 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 163 to 190 hp (+27 hp, +17%) and torque from 340 to 410 Nm (+70 Nm). ECU — Delphi DCM3.5. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 2008 — the era of classic Common Rail without strong encryption.
MultiAir is Fiat's own valve-control technology. Mid-range Fiat diesels are a high-volume chip tuning subject in Italy.
Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. On Fiat diesels, Stage 1 delivers a noticeable torque gain. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. The Fiat community in Southern Europe has a large pool of ready-made Stage files. Mid-range Fiat engines are a high-volume chip tuning subject.
Frequently asked questions
What is the Stage 1 effect on the Fiat Scudo 2.0 JTDm 163 hp?
Stage 1 for the Fiat Scudo 2.0 JTDm 163 hp adds +27 hp — power increases from 163 to 190 hp (+17%). Torque rises from 340 to 410 Nm (+70 Nm).
What does a Stage 1 remap of the Fiat Scudo 2.0 JTDm 163 hp include?
Stage 1 on the Fiat Scudo 2.0 JTDm 163 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +27 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 JTDm 163 hp?
Stage 1 on the Fiat Scudo 2.0 JTDm 163 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Fiat Scudo 2.0 JTDm 163 hp?
Stage 2 for the Fiat Scudo 2.0 JTDm 163 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Fiat Scudo 2.0 JTDm 163 hp run?
The control unit of the Fiat Scudo 2.0 JTDm 163 hp is the Delphi DCM3.5. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Fiat Scudo?
Stage 1 on the Fiat Scudo voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Fiat Scudo 2.0 JTDm 163 hp done?
The full remap cycle for the Fiat Scudo — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Fiat Scudo?
The original Fiat Scudo ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Fiat Scudo 2.0 JTDm 163 hp?
The cost of Stage 1 for the Fiat Scudo 2.0 JTDm 163 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.