Fiat Scudo 1.6 HDI (2008) 90 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Fiat Scudo 1.6 HDI (2008) 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Scudo 1.6 HDI (2008) 90 hp ECU
Fiat Scudo (2008) 1.6 HDI (2008) 90 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 90 to 115 hp (+25 hp, +28%) and torque from 230 to 275 Nm (+45 Nm). This engine ships with different ECU variants: Bosch EDC16C34, Bosch EDC17C10. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2008 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Fiat is one of the founders of Stellantis, formed by the merger of FCA and PSA in 2021. Fiat-Iveco engines are widely used in the Stellantis commercial segment.
The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. Low-output Fiat engines are city units, and Stage 1 is safe on them. On naturally aspirated Fiat engines the main effect is sharper throttle response.
Frequently asked questions
How much does the power of the Fiat Scudo 1.6 HDI (2008) 90 hp increase after Stage 1?
After Stage 1 the power of the Fiat Scudo 1.6 HDI (2008) 90 hp rises from 90 to 115 hp, a gain of 25 hp (+28%). Torque rises from 230 to 275 Nm (+45 Nm).
How does Stage 1 differ from stock on the Fiat Scudo?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Scudo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Is Stage 1 worth doing on the base Fiat Scudo?
Stage 1 on the base Fiat Scudo is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Fiat Scudo 1.6 HDI (2008) 90 hp?
Stage 2 on the Fiat Scudo 1.6 HDI (2008) 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Fiat Scudo 1.6 HDI (2008) 90 hp built with?
The Fiat Scudo 1.6 HDI (2008) 90 hp comes with 2 ECU variants: Bosch EDC16C34, Bosch EDC17C10. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Fiat Scudo remain valid after Stage 1?
After remapping the Fiat Scudo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Scudo?
Reading and writing via OBD takes 25-30 minutes on the Fiat Scudo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Scudo?
Before Stage 1 the original of the Fiat Scudo 1.6 HDI (2008) 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Scudo 1.6 HDI (2008) 90 hp cost?
The remap price for the Fiat Scudo 1.6 HDI (2008) 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.