Fiat Scudo 2.0 JTD 84 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Fiat Scudo 2.0 JTD 84 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Scudo 2.0 JTD 84 hp ECU
Fiat Scudo (1995) 2.0 JTD 84 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 84 to 114 hp (+30 hp, +36%) and torque from 192 to 265 Nm (+73 Nm). ECU — Bosch EDC15C2. Flashing method: OBD or Bench depending on the unit's protection. The 1995 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
MultiAir is Fiat's own valve-control technology. Low-output Fiat diesels are city units, and Stage 1 is safe on them.
The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. Low-output Fiat engines are city units, and Stage 1 is safe on them. On naturally aspirated Fiat engines the main effect is sharper throttle response.
Frequently asked questions
What is the Stage 1 effect on the Fiat Scudo 2.0 JTD 84 hp?
After Stage 1 the power of the Fiat Scudo 2.0 JTD 84 hp rises from 84 to 114 hp, a gain of 30 hp (+36%). Torque rises from 192 to 265 Nm (+73 Nm).
How does Stage 1 differ from stock on the Fiat Scudo?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Scudo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
Is Stage 1 worth doing on the base Fiat Scudo?
Stage 1 on the base Fiat Scudo is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Fiat Scudo 2.0 JTD 84 hp?
Stage 2 on the Fiat Scudo 2.0 JTD 84 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Fiat Scudo 2.0 JTD 84 hp use?
The Fiat Scudo 2.0 JTD 84 hp is fitted with the Bosch EDC15C2 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Fiat Scudo remain valid after Stage 1?
After remapping the Fiat Scudo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Scudo?
Reading and writing via OBD takes 25-30 minutes on the Fiat Scudo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Scudo?
Before Stage 1 the original of the Fiat Scudo 2.0 JTD 84 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Scudo 2.0 JTD 84 hp cost?
The remap price for the Fiat Scudo 2.0 JTD 84 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.