Fiat Punto 1.2i 60 hp — Stage 1 file (+5 hp)
hp
Stage 1 file for Fiat Punto 1.2i 60 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Punto 1.2i 60 hp ECU
Fiat Punto (2003) 1.2i 60 hp — mass-market petrol engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 60 to 65 hp (+5 hp, +8%) and torque from 100 to 105 Nm (+5 Nm). ECU — Marelli IAW 5AF. Flashing method: OBD or Bench depending on the unit's protection. The 2003 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Fiat is one of the founders of Stellantis, formed by the merger of FCA and PSA in 2021. Low-output Fiat petrol engines are naturally aspirated city-segment units; the gain is modest. On older-generation petrol Fiat models, Stage 1 is done via OBD without bench. Fiat's petrol range consists of compact turbo and naturally aspirated engines for the urban segment.
The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. Low-output Fiat engines are city units, and Stage 1 is safe on them. On naturally aspirated Fiat engines the main effect is sharper throttle response.
Frequently asked questions
What is the Stage 1 effect on the Fiat Punto 1.2i 60 hp?
The Stage 1 gain for the Fiat Punto 1.2i 60 hp is 5 hp (+8%) over the stock 60 hp, for a total of 65 hp. Torque rises from 100 to 105 Nm (+5 Nm).
What is Stage 1 chip tuning for the Fiat Punto?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Punto with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +5 hp with no hardware changes.
Is Stage 1 worth doing on the base Fiat Punto?
Stage 1 on the base Fiat Punto is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Fiat Punto 1.2i 60 hp?
Stage 2 on the Fiat Punto 1.2i 60 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Fiat Punto 1.2i 60 hp use?
The Fiat Punto 1.2i 60 hp is fitted with the Marelli IAW 5AF ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Fiat Punto remain valid after Stage 1?
After remapping the Fiat Punto, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Punto?
Reading and writing via OBD takes 25-30 minutes on the Fiat Punto. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Punto?
Before Stage 1 the original of the Fiat Punto 1.2i 60 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Punto 1.2i 60 hp cost?
The remap price for the Fiat Punto 1.2i 60 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.