Fiat Punto EVO 1.6 JTDm 120 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Fiat Punto EVO 1.6 JTDm 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Fiat Punto EVO 1.6 JTDm 120 hp ECU
Fiat Punto EVO (2010) 1.6 JTDm 120 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 120 to 140 hp (+20 hp, +17%) and torque from 320 to 360 Nm (+40 Nm). This engine ships with different ECU variants: Bosch EDC16C08, Bosch EDC16C39 (CAN), Bosch EDC17C49, Bosch EDC17C69. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Fiat is an Italian carmaker from Turin, founded in 1899. DPF/SCR with AdBlue is standard on all Euro-6 Fiat diesels.
On pre-2017 Fiat models, Stage 1 is done via OBD without bench. Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. Mid-range Fiat engines are a high-volume chip tuning subject. The Fiat community in Southern Europe has a large pool of ready-made Stage files.
Frequently asked questions
What is the Stage 1 effect on the Fiat Punto EVO 1.6 JTDm 120 hp?
The Stage 1 gain for the Fiat Punto EVO 1.6 JTDm 120 hp is 20 hp (+17%) over the stock 120 hp, for a total of 140 hp. Torque rises from 320 to 360 Nm (+40 Nm).
What is Stage 1 chip tuning for the Fiat Punto EVO?
Stage 1 is a software optimization of the factory ECU firmware of the Fiat Punto EVO with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
What is the risk of Stage 1 on the Fiat Punto EVO 1.6 JTDm 120 hp?
A remap of the Fiat Punto EVO 1.6 JTDm 120 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Fiat Punto EVO 1.6 JTDm 120 hp?
Stage 2 on the Fiat Punto EVO 1.6 JTDm 120 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Fiat Punto EVO 1.6 JTDm 120 hp built with?
The Fiat Punto EVO 1.6 JTDm 120 hp comes with 4 ECU variants: Bosch EDC16C08, Bosch EDC16C39 (CAN), Bosch EDC17C49, Bosch EDC17C69. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Fiat Punto EVO remain valid after Stage 1?
After remapping the Fiat Punto EVO, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Fiat Punto EVO?
Reading and writing via OBD takes 25-30 minutes on the Fiat Punto EVO. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Fiat Punto EVO?
Before Stage 1 the original of the Fiat Punto EVO 1.6 JTDm 120 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Fiat Punto EVO 1.6 JTDm 120 hp cost?
The remap price for the Fiat Punto EVO 1.6 JTDm 120 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.